2011/03/04 Caterpillar


A New Cover for the Fuel Transfer Pump Is Used on Certain Machines {1256}

Usage:

385B ANS
Excavator:
365C (S/N: ELC1-UP; MEM1-UP; FEN1-UP; MCS1-UP; MCY1-UP)
385B (S/N: RCD1-UP; ANS1-UP)
385C (S/N: EDA1-UP; MNZ1-UP)
5090B (S/N: CLD1-UP)

Description of Change: The new cover will prevent the nuts that secure the cover from loosening, allowing engine oil to leak out of the front cover.

Adaptable To: The new 133-9116 Cover is a direct replacement for the existing 103-4672 Cover. Two new 0S-0699 Studs must be used when installing the new 133-9116 Cover .

Note: The existing nuts may be reused.This change is effective for engine serial numbers that were built on or after 31August 2010.

Caterpillar Information System:

440 and 450 Backhoe Loader Engine Oil Sample - Obtain
312E Excavator Capacities (Refill)
320E Excavator Declaration of Conformity
312F and 313F Excavators Sound Information and Vibration Information
312E Excavator Declaration of Conformity
312E Excavator Boom/Stick/Bucket Combinations
320E Excavator Specifications
C7.1 Engines For Caterpillar Built Machines Customer Specified Parameters Table
450F Backhoe Loader Fuel System Secondary Filter - Replace
C7.1 Engines For Caterpillar Built Machines Customer Specified Parameters
300.9D VPS Mini Hydraulic Excavator Machine Systems Stick Cylinder
C9.3 Engines for Caterpillar Built Machines ECM - Replace
320E Excavator Boom/Stick/Bucket Combinations
320E Excavator Safety Messages
M316D, M318D and M322D Wheeled Excavators Machine Systems System Pressure - Release
2011/08/05 Improved Track Roller Group is Now Used for Certain 325D Excavators {4180}
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve (Operating Pressure) - Test and Adjust
320E Excavator Condenser (Refrigerant) - Clean
C7.1 Engines For Caterpillar Built Machines Acceleration Is Poor or Throttle Response Is Poor
2011/03/04 New Engine Software is Now Available for Certain 3054E and 3056E Machine Engines {1901, 1920}
300.9D and 300.9D VPS Mini Hydraulic Excavator Caterpillar Approved Work Tools
300.9D Mini Hydraulic Excavator Swing Hydraulic System
349E Excavator Machine System Specifications Clamp (Exhaust)
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve (Operating Pressure) - Test and Adjust
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.