300.9D and 300.9D VPS Mini Hydraulic Excavator Caterpillar


Caterpillar Approved Work Tools

Usage:

300.9D DW2


注意事項

請只使用 Caterpillar 所建議的作業機具。 Caterpillar 並未建議的作業機具可能會損害您的機器。 請諮詢 Cat 代理商,瞭解建議的作業機具。


下列作業機具已受 Caterpillar 核准。 請參閱每個作業機具的擁有者手冊和維修手冊,以瞭解如何正確操作、維護及維修作業機具。

使用其他製造商的作業機具,或是適用於其他挖掘機的作業機具,可能會大量減少機器輸出和穩定度,也可能損壞機器並造成駕駛員或其他人員受傷。

務必將作業機具的重量和它的最大淨載重,與起重力表格做比較。 切勿超過起重力表格所示的最大淨載重。

表1
Caterpillar 核准的作業機具 
  寬度  重量  功能 
反鏟鏟斗  250 mm (10")  15 kg (33 lb)  14 L (4 gal) 
反鏟鏟斗  370 mm (14.5")  17 kg (38 lb)  18 L (5 gal) 
反鏟鏟斗  370 mm (14.5")  19 kg (42 lb)  24 L (6.5 gal) 
鏟斗  700 mm (27.5)  25.5 kg (54 lb)  27 L (7 gal) 
H25D 錘具    70 kg (154 lb)   

使用錘具會縮短液壓油壽命。 若要使用錘具,請執行下列測量:

表2
應用  液壓油  液壓系統機油濾清器 
正常作業 (挖掘作業)  首次應於達到 500 工時後更換,其後則每 1000 工時後更換  首次應於達到 50 工時後更換,其後則每 500 工時後更換 
錘具作業的比率  20%  每 800 工時  300 工時 
40% 每 400 工時 
60% 每 300 工時  100 工時 
超過 80% 每 200 工時 

本清單於出版時乃屬完整清單。 自出版以來,可能有經核准的其他作業機具。 請洽詢 Cat 代理商以瞭解經核准作業機具的更新清單。

Caterpillar Information System:

2011/03/04 New Engine Software is Now Available for Certain 3054E and 3056E Machine Engines {1901, 1920}
C7.1 Engines For Caterpillar Built Machines Acceleration Is Poor or Throttle Response Is Poor
320E Excavator Condenser (Refrigerant) - Clean
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve (Operating Pressure) - Test and Adjust
2011/08/05 Improved Track Roller Group is Now Used for Certain 325D Excavators {4180}
M316D, M318D and M322D Wheeled Excavators Machine Systems System Pressure - Release
320E Excavator Safety Messages
320E Excavator Boom/Stick/Bucket Combinations
2011/03/04 A New Cover for the Fuel Transfer Pump Is Used on Certain Machines {1256}
440 and 450 Backhoe Loader Engine Oil Sample - Obtain
312E Excavator Capacities (Refill)
320E Excavator Declaration of Conformity
300.9D Mini Hydraulic Excavator Swing Hydraulic System
349E Excavator Machine System Specifications Clamp (Exhaust)
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Pressure Control Valve (Operating Pressure) - Test and Adjust
300.9D and 300.9D VPS Mini Hydraulic Excavator Undercarriage - Check
300.9D and 300.9D VPS Mini Hydraulic Excavator Windows - Clean
2011/03/11 Instructions to Obtain and Upload a Warranty Report File Are Now Available for All Machines Equipped with C4.4 through C32 Tier 4 Interim Engines {0336, 7772}
2013/06/11 Use the Latest Available Production Version of Cat ET on All Machines with Tier 4 Interim C4.4 through C32 Engines {0785, 7600, 7610}
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Hydraulic Accumulator - Test and Charge
300.9D and 300.9D VPS Mini Hydraulic Excavator Travel Alarm - Test
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Hydraulic Accumulator - Test and Charge
300.9D and 300.9D VPS Mini Hydraulic Excavator Track Adjustment - Inspect
300.9D and 300.9D VPS Mini Hydraulic Excavator Track Adjustment - Adjust
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.