Lifting and Tying Down
Lifting the Shear
Show/hide table
| Weight of the Shear (1) | |
|---|---|
| VHS-60/4 | 6870 kg (15146 lb) |
| VHS-70/4 | 8320 kg (18342 lb) |
Show/hide table
| ( 1 ) | The weights include the mounting brackets. |
Show/hide table
 | |
| Illustration 1 | g02170113 |
Note: Do not use lifting point (1) to lift the shear. Only use this lifting point to lift the jaw.
There are four lifting points that can be used to lift the shear. There are two lifting points (2) and two lifting points (3) on the shear. If the shear is upright, use lifting points (2). If the shear is on the side, use lifting points (3). In order to lift the shear, use cables, chains, or straps that are certified for lifting.
Tying Down the Shear
In order to tie down the shear, use cables, chains, or straps that are strong enough to secure the load. Use the lifting points to tie down the shear.
Caterpillar Information System:
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Transport Position
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600} NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Operation
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Daily Inspection
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Work Tool Installation and Removal
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Declaration of Conformity
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Plate Locations and Film Locations
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Approved Machines
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Specifications
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Safety Messages
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Maintenance Interval Schedule
305D CR and 305.5D CR Mini Hydraulic Excavators Hydraulic System Boom Hydraulic System
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Reference Material
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Bushings - Lubricate
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Cutters - Inspect/Replace
The Replacement Procedure for the Hydraulic Cylinder Assembly on Certain Shears{5553} The Replacement Procedure for the Hydraulic Cylinder Assembly on Certain Shears{5553}
Caterpillar Monitoring System Service Tools
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Cutting Edge Bolts - Tighten
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Gear and Bearing - Lubricate
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Hub Nut - Check/Tighten
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Jaw - Repair
C4.2 and C6.4 Engines for Caterpillar Built Machines Air in Fuel - Test
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Rotator Head Bolts - Check
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Rotator Head Bolts - Inspect