Hydraulic Tank - Install
Installation Procedure
Show/hide table
Required Tooling     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7575     | Link Bracket     | 2     |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Use Tooling (A) and a suitable lifting device to install hydraulic tank (15) on the machine. The weight of hydraulic tank (15) is approximately 65 kg (143 lb).
Show/hide table
Illustration 1 | g01501802 |
- Install the spacers and bolts (16). Repeat for the other side.
Show/hide table
Illustration 2 | g01501804 |
- Remove Tooling (A) and the suitable lifting device.
- Connect hose (14) .
Show/hide table
Illustration 3 | g01501799 |
- Connect all necessary hose assemblies (13). Connect clip (12).
Show/hide table
Illustration 4 | g01501762 |
- Position harness assembly (5) and connect clip (11). Connect harness assembly (5) and install screws (10) .
Show/hide table
Illustration 5 | g01501750 |
- Install all necessary cable straps (9) .
Show/hide table
Illustration 6 | g01501749 |
- Position filter assembly (7) and install bolts (8) .
Show/hide table
Illustration 7 | g01501736 |
- Install all necessary cable straps (6) .
Show/hide table
Illustration 8 | g01501735 |
- Connect harness assembly (5) .
Show/hide table
Illustration 9 | g01500533 |
- Install bottom guard (4) .
Show/hide table
Illustration 10 | g01500493 |
- Use a suitable lifting device to position side door (1) on the machine. The weight of side door (1) is approximately 34 kg (75 lb).
Show/hide table
Illustration 11 | g01500253 |
- Install bolts (3) in order to secure side door (1) .
Show/hide table
Illustration 12 | g01500293 |
- Install bolts (2) .
Show/hide table
Illustration 13 | g01500274 |
- Fill the hydraulic tank. Refer to Operation and Maintenance, "Hydraulic System Oil - Change"
Caterpillar Information System:
308D CR Excavator Machine Systems Hydraulic Tank - Remove
307D Excavator Hydraulic System Medium Pressure Hydraulic System
307D Excavator Hydraulic System Two-Way Flow Hydraulic System
307D Excavator Hydraulic System One-Way Flow Hydraulic System
307D Excavator Thumb - Lubricate - If Equipped
302.5C Mini Hydraulic Excavator Hydraulic System Travel on Level Ground - Test - Optional Test
416E Backhoe Loader Quick Coupler - Clean
308D CR Excavator Machine Systems Fuel Tank - Install
308D CR Excavator Machine Systems Fuel Tank - Remove
308D CR Excavator Machine Systems Main Hydraulic Pump - Install
308D CR Excavator Machine Systems Main Hydraulic Pump - Remove
385C MHPU Mobile Hydraulic Power Unit Additional Messages
345C Excavator Machine System Specifications Stick - 4.3 m (14.11 ft)
C4.2 and C6.4 Engines for Caterpillar Built Machines Engine Oil Pan
C4.2 and C6.4 Engines for Caterpillar Built Machines Engine Oil Pan
M316D, M318D and M322D Wheeled Excavators Machine Systems Accumulator - Remove and Install
2008/06/02 The Outer Bolts in the Swing Bearing May Become Loose, Broken, or Incorrectly Torqued {7051, 7063}
308D CR Excavator Hydraulic System One-Way Flow Hydraulic System
308D CR Excavator Hydraulic System Two-Way Flow Hydraulic System
308D CR Excavator Hydraulic System Medium Pressure Hydraulic System
2008/04/14 The Durability of the Hose Assemblies in the Connecting Lines Group for the Quick Coupler Is Improved {5057, 6129}
M316D, M318D and M322D Wheeled Excavators Machine Systems Stick Cylinder - Remove and Install
M322D Excavator Machine Systems Boom Cylinder - Remove and Install
M316D, M318D and M322D Wheeled Excavators Machine Systems Cab Riser and Frame - Remove and Install