Main Hydraulic Pump - Install
Installation Procedure
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Position flange (18) and install four bolts (19) .
Show/hide table
 | |
| Illustration 1 | g01515983 |
- Install adapter (17) and two bolts (16) .
Show/hide table
 | |
| Illustration 2 | g01515982 |
- Position coupling (14) and install three bolts (15) .
Show/hide table
 | |
| Illustration 3 | g01515981 |
- Position panel (4) and use the suitable lifting device to position main hydraulic pump (13) on the machine. The weight of main hydraulic pump (13) is approximately 68 kg (150 lb).
Show/hide table
 | |
| Illustration 4 | g01497593 |
- Install bolts (12) .
Show/hide table
 | |
| Illustration 5 | g01497173 |
- Connect tube assembly (11) to the hydraulic main pump with bolts (10) .
Show/hide table
 | |
| Illustration 6 | g01496633 |
- Connect hose assemblies (9), (8), (7), (6), and (5) .
Show/hide table
 | |
| Illustration 7 | g01496613 |
- Connect panel (4) .
Show/hide table
 | |
| Illustration 8 | g01496513 |
- Install panel (2). Connect clip (3) .
Show/hide table
 | |
| Illustration 9 | g01496213 |
- Install panel (1) .
Show/hide table
 | |
| Illustration 10 | g01496173 |
- Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
End By: Install the counterweight. Refer to Disassembly and Assembly, "Counterweight - Remove and Install".
Caterpillar Information System:
308D CR Excavator Machine Systems Main Hydraulic Pump - Remove
385C MHPU Mobile Hydraulic Power Unit Additional Messages
308D CR Excavator Machine Systems Gear Pump (Pilot) - Install
308D CR Excavator Machine Systems Gear Pump (Pilot) - Remove
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine System Stick - 3.9 m (12.80 ft)
C4.2 and C6.4 Engines for Caterpillar Built Machines Rocker Shaft
345D, 349D and 349D2 Excavator Machine System Specifications Boom Cylinder Lines
C4.2 and C6.4 Engines for Caterpillar Built Machines Exhaust Manifold
C4.2 and C6.4 Engines for Caterpillar Built Machines Cylinder Head
345C Excavator Machine System Specifications Boom - 7.4 m (24.28 ft)
M316D, M318D and M322D Wheeled Excavators Machine Systems Hydraulic Tank - Install
M316D, M318D and M322D Wheeled Excavators Machine Systems Hydraulic Tank - Remove
308D CR Excavator Machine Systems Fuel Tank - Remove
308D CR Excavator Machine Systems Fuel Tank - Install
416E Backhoe Loader Quick Coupler - Clean
302.5C Mini Hydraulic Excavator Hydraulic System Travel on Level Ground - Test - Optional Test
307D Excavator Thumb - Lubricate - If Equipped
307D Excavator Hydraulic System One-Way Flow Hydraulic System
307D Excavator Hydraulic System Two-Way Flow Hydraulic System
307D Excavator Hydraulic System Medium Pressure Hydraulic System
308D CR Excavator Machine Systems Hydraulic Tank - Remove
308D CR Excavator Machine Systems Hydraulic Tank - Install
345C Excavator Machine System Specifications Stick - 4.3 m (14.11 ft)
C4.2 and C6.4 Engines for Caterpillar Built Machines Engine Oil Pan