Daily Performance Log
Show/hide table
| Engine Performance | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Operator | Date | Time | Site name | Engine no. | |||||||||||||||
| Serial no. | Engine hours | Engine rpm | % Load | % Availability | |||||||||||||||
| Air Inlet | Nominal | Actual | Exhaust | Nominal | Actual | ||||||||||||||
| Manifold pressure | Stack temperature | ||||||||||||||||||
| Manifold temperature | Turbocharger rpm | ||||||||||||||||||
| Air restriction | |||||||||||||||||||
| Cylinder Exhaust | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | |||||||||||
| Nominal temperature | |||||||||||||||||||
| Actual temperature | |||||||||||||||||||
| Jacket Water | Nominal | Actual | ACOC | Nominal | Actual | ||||||||||||||
| Inlet temperature | Inlet temperature | ||||||||||||||||||
| Outlet temperature | Pressure | ||||||||||||||||||
| Pressure | Lubrication Oil | ||||||||||||||||||
| Generator | Pressure | ||||||||||||||||||
| Output (kW) | Temperature | ||||||||||||||||||
| Bearing temperature (front) | Filter differential pressure | ||||||||||||||||||
| Bearing temperature (rear) | Fuel | ||||||||||||||||||
| Generator Windings | Pressure | ||||||||||||||||||
| Temperature (phase A) | Temperature | ||||||||||||||||||
| Temperature (phase B) | Filter differential pressure | ||||||||||||||||||
| Temperature (phase C) | % Actuator travel | ||||||||||||||||||
| Fluid Level Check | Amount Added | Fluid Level Check | Amount Added | ||||||||||||||||
| Crankcase | Generator | ||||||||||||||||||
| Cooling system | Prelube pump lubricator | ||||||||||||||||||
| Day tank | Starting motor lubricator | ||||||||||||||||||
| Governor | |||||||||||||||||||
| Operator | Date | Time | Site name | Engine no. | |||||||||||||||
| Findings and Observations | Status | Recommendations | |||||||||||||||||
| Required Parts | Parts
Availability |
Repair
Time |
|||||||||||||||||
| Part Number | Description | ||||||||||||||||||
Caterpillar Information System:
3608 Engine Hourly Performance Log
3176C and 3196 Engines for Caterpillar Built Machines Aftercooler - Test
3524B Engines for Off-Highway Trucks Replacing the ECM
3524B Engines for Off-Highway Trucks Flash Programming
3034 Engine for Caterpillar Built Machines Rocker Shaft - Assemble
3176C and 3196 Engines for Caterpillar Built Machines Fuel System - Prime
G3516B Engines Analog Sensor Signal
784B, 784C, 785B, 785C, 785C HAA, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors Variable Speed Fan Drive Speed Sensor (Fan Drive)
320D and 323D Excavators Machine System Specifications Shuttle Valve (Pump Flow Control)
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>7C-1601</B> Generator through <B>7C-9126</B> Generator
G3516B Engines Ignition Transformers Secondary Circuit and Spark Plugs
SPS342 Skid Mounted Pumper Engine Crankcase Breather - Clean
SPF343 and SPF343C Trailer Mounted Pumpers Plate Locations and Film Locations
3608 Engine Metal Particle Detector - Inspect
G3516B Engines +8V Sensor Voltage Supply
Installation Of The 033-6039 O-Ring Seal Into The 3408E And 3412E Unit Injector Hydraulic Pump{1251} Installation Of The 033-6039 O-Ring Seal Into The 3408E And 3412E Unit Injector Hydraulic Pump{1251}
3500B and 3500B High Displacement Generator Set Engines Starting the Engine
320D and 323D Excavators Machine System Specifications Relief Valve (Pilot)
Programmable Relay Control Module (PRCM) PRCM CID 0333 - FMI 04
3524B Engines for 797 and 797B Off-Highway Trucks Electronic Control Terms
Programmable Relay Control Module (PRCM) PRCM CID 0334 - FMI 03
Programmable Relay Control Module (PRCM) PRCM CID 0334 - FMI 04
3500B and 3500B High Displacement Generator Set Engines ECM Total Fuel Consumption Adjustment - Diesel Fuel
C-10, C-12, 3406E, C-15, C-16 and C-18 Engines - Electronic PTO Installation and Application Switches