Installation Of The 033-6039 O-Ring Seal Into The 3408E And 3412E Unit Injector Hydraulic Pump{1251}
- Engine:
- 3408E Machine (S/N: 80M3679-UP)
- 3412E Machine (S/N: 99C6453-UP)
- 3408E Industrial (S/N: 7PR717-UP)
- 3412E Industrial (S/N: 4CR1330-UP)
- 3412E Industrial (S/N: BDT216-UP)
- 3412E Marine (S/N: 9KS791-UP)
- 3412E Machine (S/N: 99C6453-UP)
Introduction
The design of the groove for the O-ring has changed. The proper O-ring should be used in order to match the design of the groove.
Show/hide table
Illustration 1 | g00715900 |
(1) O-Ring seal |
Show/hide table
Illustration 2 | g00716166 |
Old O-Ring groove Use with 9X-7680 O-Ring Seal |
Show/hide table
Illustration 3 | g00716168 |
New O-Ring groove Use with 033-6039 O-Ring Seal |
Show/hide table
O-Ring Part Numbers     | |
New Part Number     | Old Part Number     |
033-6039     | 9X-7680     |
Improved Kits
One extra O-ring of the new size will be included within each kit. The affected kits are listed in table 2.
Show/hide table
Part Number     | Description     |
138-6256     | Seal Kit     |
154-6732     | Fuel Injection Pump Kit     |
166-5985     | Unit Injector Hydraulic Pump Compensator     |
Caterpillar Information System:
G3516B Engines +8V Sensor Voltage Supply
3608 Engine Metal Particle Detector - Inspect
SPF343 and SPF343C Trailer Mounted Pumpers Plate Locations and Film Locations
3608 Engine Daily Performance Log
3608 Engine Hourly Performance Log
3176C and 3196 Engines for Caterpillar Built Machines Aftercooler - Test
3524B Engines for Off-Highway Trucks Replacing the ECM
3524B Engines for Off-Highway Trucks Flash Programming
3034 Engine for Caterpillar Built Machines Rocker Shaft - Assemble
3176C and 3196 Engines for Caterpillar Built Machines Fuel System - Prime
G3516B Engines Analog Sensor Signal
784B, 784C, 785B, 785C, 785C HAA, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors Variable Speed Fan Drive Speed Sensor (Fan Drive)
3500B and 3500B High Displacement Generator Set Engines Starting the Engine
320D and 323D Excavators Machine System Specifications Relief Valve (Pilot)
Programmable Relay Control Module (PRCM) PRCM CID 0333 - FMI 04
3524B Engines for 797 and 797B Off-Highway Trucks Electronic Control Terms
Programmable Relay Control Module (PRCM) PRCM CID 0334 - FMI 03
Programmable Relay Control Module (PRCM) PRCM CID 0334 - FMI 04
3500B and 3500B High Displacement Generator Set Engines ECM Total Fuel Consumption Adjustment - Diesel Fuel
C-10, C-12, 3406E, C-15, C-16 and C-18 Engines - Electronic PTO Installation and Application Switches
Programmable Relay Control Module (PRCM) Relay Module - Replace
3500B and 3500B High Displacement Generator Set Engines ECM Hour Increment Adjustment
Programmable Relay Control Module (PRCM) Programmable Relay Control Module - Replace
SPT343 Truck Mounted Pumper Belts - Inspect/Adjust/Replace