Rotator Motor and Manifold - Remove
Note: Cleanliness is an important factor. Before you begin the removal procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before operating any compartment or disassembling any component containing fluids. After collecting all fluids in suitable containers, dispose of all fluids according to local regulations and mandates. |
- Position the grapple, as shown.
Show/hide table
Illustration 2 g01412694 - Remove bolts (2) and cover assembly (1).
Show/hide table
Illustration 3 g01412725 - Remove bolts (4) and remove the rotator motor and the manifold (3).
Show/hide table
| |
| Illustration 1 | g01412693 |
Caterpillar Information System:
314D Excavator Fuel Transfer Pump (Refueling) - If Equipped
307D Excavator Securing the Machine
3176C and 3196 Engines for Caterpillar Built Machines Camshaft
365C Material Handler Hydraulic System Grapple Hydraulic System
2007/10/29 The Nut for the Rocker Arm in the Valve Mechanism Group Is Improved {1102}
Procedure for Repairing Cracks and Strengthening the Stick Assembly{6502} Procedure for Repairing Cracks and Strengthening the Stick Assembly{6502}
2007/10/01 Leakage of the Fuel Injector {1251, 1290}
345C Excavator Maintenance Interval Schedule
GSH9, GSH15, GSH20 and GSH22 Orange Peel Grapples Grapple Link
365C Material Handler Hydraulic System Travel Hydraulic System
330D Waste Handler Safety Messages
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines System Schematic
315D and 318D Excavators Hydraulic System Main Hydraulic System
GSH9B, GSH15B and GSH20B Orange Peel Grapples Rotator Motor and Manifold - Install
3176C and 3196 Engines for Caterpillar Built Machines Cylinder Liner
2009/03/16 New Software Is Available for Preventing Failures of the Thumb Cylinder on Certain Excavators {5701, 7610, 7620}
C13, C15, and C18 Tier 4 Final Engines Cylinder Liner
3176C and 3196 Engines for Caterpillar Built Machines Piston and Rings
GSH9B, GSH15B and GSH20B Orange Peel Grapples Hydraulic Rotator - Remove
GSH9B, GSH15B and GSH20B Orange Peel Grapples Hydraulic Rotator - Install
365C Material Handler Hydraulic System Return Hydraulic System
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Customer Communication Module
SR117, SR118, SR121, SR318 and SR321 Snow Blowers Work Tool Troubleshooting
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Temperature Sensor