Engine Front Mount - Remove and Install - Right Side
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 189-0409     | Shackle As     | 1     |
- Drain the Coolant from the cooling system into a suitable container for storage or for disposal.
- Remove bolts (1) and reposition bracket assembly (2) .
Show/hide table
Illustration 1 | g01314085 |
- Disconnect gas spring (4). Reposition and secure cover assembly (3) .
Show/hide table
Illustration 2 | g01314092 |
Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
- Disconnect hose (6) and remove elbow (5) .
Show/hide table
Illustration 3 | g01314104 |
- Attach Tooling (A) and a suitable lifting device to the engine. Apply slight lifting tension to the engine. The weight of the engine is approximately 770 kg (1700 lb).
Show/hide table
Illustration 4 | g01314097 |
- Remove bolt (7) and washer (8). Remove bolts (10) and mount assembly (9). Remove plate (11) .
Show/hide table
Illustration 5 | g01314130 |
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 189-0409     | Shackle As     | 1     |
- Install plate (11). Install mount assembly (9) and bolts (10). Install washer (8) and bolt (7) .
Show/hide table
Illustration 6 | g01314130 |
- Use a Tooling (A) and a suitable lifting device in order to relieve tension on the engine.
Show/hide table
Illustration 7 | g01314097 |
- Install elbow (5) and connect hose (6) .
Show/hide table
Illustration 8 | g01314104 |
- Position cover assembly (3). Connect gas spring (4) .
Show/hide table
Illustration 9 | g01314092 |
Show/hide table
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
- Position bracket assembly (2) and install bolts (1) .
Show/hide table
Illustration 10 | g01314085 |
- Fill the coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Caterpillar Information System:
New Replacement Options for Serviced Engines{1000} New Replacement Options for Serviced Engines{1000}
M316D Wheeled Excavator C6.6 Engine Supplement Engine Enclosure Group - Remove and Install
2007/07/23 A New Relay Eliminates Issues of Hard Starting {1426}
303.5 Mini Hydraulic Excavator Bucket Tips - Inspect/Replace - J200 Tips
325C Excavator Maintenance Interval Schedule
C18 Engine for Caterpillar Built Machines Retarder - Test
C18 Engine for Caterpillar Built Machines Injector Solenoid - Test
C18 Engine for Caterpillar Built Machines Fuel Transfer Pump - Test
Installation of the Rotary Fuel Injection Pump{1251} Installation of the Rotary Fuel Injection Pump{1251}
3126 and C7 Oil Pan Gaskets{1302} 3126 and C7 Oil Pan Gaskets{1302}
C18 Engine for Caterpillar Built Machines Electrical Power Supply - Test
3412E Engine for Caterpillar Built Machines Prelubrication - Test
M316D Wheeled Excavator C6.6 Engine Supplement Engine Rear Mount - Remove and Install
330D Forest Machine Machine Systems Final Drive and Travel Motor - Remove
323D Excavator Refrigerant Dryer - Replace
C6.6 Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install - Mechanical Priming Pump
308D CR Mini Hydraulic Excavator Caterpillar Approved Work Tools
2007/07/16 An Improvement has been Made to the Bulk Material for Hose Assemblies {5057}
3412E Engine for Caterpillar Built Machines Sensor Signal (Analog, Active) - Test
320D Forest Machines Power Receptacle - If Equipped
303C CR, 303.5C CR, 304C CR and 305C CR Mini Hydraulic Excavators Bucket Tips - Inspect/Replace - Vertical Retention System for a Round Hole Tip
320D Forest Machines Specifications
GSH9B, GSH15B and GSH20B Orange Peel Grapples Grapple Link
320D Forest Machines Fuses - Replace