Bucket Tips - Inspect/Replace - Vertical Retention System for a Round Hole Tip
Show/hide table
Jatuhan bucket dapat mengakibatkan cedera atau bahkan kematian. Ganjal bucket sebelum melakukan penggantian kuku bucket atau side cutter. |
Show/hide table
Ilustrasi 1 | g00101352 |
(1) Dapat digunakan
(2) Ganti tip bucket. (3) Terlalu aus |
Periksa adanya keausan tip bucket. Jika tip bucket berlubang, ganti tip bucket.
- Ganjal bucket.
Show/hide table
Ilustrasi 3 g00823857 - Lepaskan pin dari tip bucket. Gunakan palu dan pukulan untuk memasukkan pin dari tip bucket.
Show/hide table
Ilustrasi 4 g01198006 (4) Tip
(5) Adapter
(6) Pin - Bersihkan adapter dan pin. Ketika mengganti tip bucket (4), ganti juga pin (6).
Show/hide table
Ilustrasi 5 g00823892 - Pasang tip bucket yang baru ke adaptor.
Catatan: Tip bucket dapat diputar 180 derajat untuk memungkinkan penetrasi yang lebih dalam atau dangkal.
- Masukkan pin (6) melalui tip (4).
- Setelah memasukkan pin (6), pastikan pin terpasang dengan benar pada alurnya.
Show/hide table
Ilustrasi 2 | g00823856 |
Show/hide table
Ilustrasi 6 | g01092808 |
Bucket Dengan Side Cutter (A) Side cutter |
- Lepaskan baut pemasangan dan side cutter.
- Bersihkan permukaan monting dari pelat samping pada bucket dan side cutter. Bersihkan bila ada kotoran pada permukaan yang berpasangan.
Show/hide table
Ilustrasi 7 g01092810 (A) Side cutter Catatan: Beberapa jenis side cutter dapat dirotasi untuk menambah usia keausan.
- Pasang side cutter.
Catatan: Beberapa baut tertentu akan memerlukan compound untuk ulir.
- Kencangkan baut dengan tangan.
Show/hide table
Ilustrasi 8 g01092812 Bagian B-B dari Ilustrasi 7
(A) Side cutter
(C) Shear ledge pada side cutter
(D) Pelat samping pada bucket
(E)0.0 mm (0.0 inch) - Pastikan bahwa tidak ada celah antara pelat samping pada bucket dan shear ledge pada side cutter.
- Kencangkan baut pemasangan sesuai spesifikasi.
Caterpillar Information System:
320D Forest Machines Power Receptacle - If Equipped
3412E Engine for Caterpillar Built Machines Sensor Signal (Analog, Active) - Test
2007/07/16 An Improvement has been Made to the Bulk Material for Hose Assemblies {5057}
308D CR Mini Hydraulic Excavator Caterpillar Approved Work Tools
C6.6 Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install - Mechanical Priming Pump
323D Excavator Refrigerant Dryer - Replace
330D Forest Machine Machine Systems Final Drive and Travel Motor - Remove
M316D Wheeled Excavator C6.6 Engine Supplement Engine Rear Mount - Remove and Install
M316D Wheeled Excavator C6.6 Engine Supplement Engine Front Mount - Remove and Install - Right Side
New Replacement Options for Serviced Engines{1000} New Replacement Options for Serviced Engines{1000}
M316D Wheeled Excavator C6.6 Engine Supplement Engine Enclosure Group - Remove and Install
2007/07/23 A New Relay Eliminates Issues of Hard Starting {1426}
320D Forest Machines Specifications
GSH9B, GSH15B and GSH20B Orange Peel Grapples Grapple Link
320D Forest Machines Fuses - Replace
GSH9B, GSH15B and GSH20B Orange Peel Grapples Grapple Link
GSH9B, GSH15B and GSH20B Orange Peel Grapples Grapple Link
3412E Engine for Caterpillar Built Machines Sensor Supply - Test
GSH9B, GSH15B and GSH20B Orange Peel Grapples Grapple Link
GSH9B, GSH15B and GSH20B Orange Peel Grapples Grapple Link
XQP150 Rental Generator Set Water Pump - Inspect
M315D, M315D Series 2, M315D2, M317D Series 2 and M317D2 Wheeled Excavators Machine Systems Stabilizer - Remove and Install - Rear
GSH9B, GSH15B and GSH20B Orange Peel Grapples Grapple Link
C18 Engine for Caterpillar Built Machines Sensor Signal (Analog, Active) - Test