M316D Wheeled Excavator C6.6 Engine Supplement Caterpillar

Removal Procedure

Show/hide table



Illustration 1	g01312049

Show/hide table

Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force.

1. Disconnect gas spring (3). Remove bolts (1). Use two people in order to remove door assembly (2). The weight of door assembly (2) is approximately 23 kg (50 lb).

Show/hide table



Illustration 2	g01312051

2. Remove bolts (4) .

Show/hide table



Illustration 3	g01312052

3. Remove bolts (6) and sheet (5) .

Show/hide table



Illustration 4	g01312053

Show/hide table

Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force.

4. Disconnect gas springs (8) from door assembly (7) .

Show/hide table



Illustration 5	g01312054

Show/hide table



Illustration 6	g01312055

5. Attach a suitable lifting device to door assembly (7). The weight of door assembly (7) is approximately 50 kg (110 lb). Remove bolts (9) from both sides and remove door assembly (7) .

Installation Procedure

Show/hide table



Illustration 7	g01312054

Show/hide table



Illustration 8	g01312055

1. Attach a suitable lifting device to door assembly (7). The weight of door assembly (7) is approximately 50 kg (110 lb). Position door assembly (7) and install bolts (9) on both sides.

Show/hide table



Illustration 9	g01312053

Show/hide table

Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment.

2. Connect gas springs (8) to door assembly (7) .

Show/hide table



Illustration 10	g01312052

3. Install sheet (5) and bolts (6) .

Show/hide table



Illustration 11	g01312051

4. Install bolts (4) .

Show/hide table



Illustration 12	g01312049

Show/hide table

Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment.

5. Use two people in order to install door assembly (2). The weight of door assembly (2) is approximately 23 kg (50 lb). Install bolts (1). Connect gas spring (3) .