Illustration 1 | g00386924 |
Cylinder And Valve Location (A) Exhaust valves and (B) Inlet valves |
Bore ... 125.0 mm (4.92 inch)
Stroke ... 140.0 mm (5.51 inch)
Displacement ... 10.3 L (629 in3)
Cylinder arrangement ... In-line
Valves per cylinder ... 4
In order to check the engine valve lash setting, the engine must be cold and the engine must be stopped. Engine valve lash settings
- Inlet ... 0.38 mm (.015 inch)
- Exhaust ... 0.64 mm (.025 inch)
Type of combustion ... Direct Injection
Firing Order ... 1 - 5 - 3 - 6 - 2 - 4
The crankshaft rotation is viewed from the flywheel end of the engine. Crankshaft rotation ... Counterclockwise
Note: The front end of the engine is opposite of the flywheel end of the engine. The left side of the engine and the right side of the engine are viewed from the flywheel end of the engine. The No. 1 cylinder is the front cylinder.
C-12 Engines
Illustration 2 | g00386924 |
Cylinder And Valve Location (A) Exhaust valves and (B) Inlet valves |
Bore ... 130.0 mm (5.12 inch)
Stroke ... 150.0 mm (5.91 inch)
Displacement ... 12 L (732 in3)
Cylinder arrangement ... In-line
Valves per cylinder ... 4
In order to check the engine valve lash setting, the engine must be cold and the engine must be stopped. Engine valve lash settings
- Inlet ... 0.38 mm (.015 inch)
- Exhaust ... 0.64 mm (.025 inch)
Type of combustion ... Direct Injection
Firing Order ... 1 - 5 - 3 - 6 - 2 - 4
The crankshaft rotation is viewed from the flywheel end of the engine. Crankshaft rotation ... Counterclockwise
Note: The front end of the engine is opposite of the flywheel end of the engine. The left side of the engine and the right side of the engine are viewed from the flywheel end of the engine. The No. 1 cylinder is the front cylinder.