Gear Group (Front) - Time
Show/hide table
 | |
| 图 1 | g01134615 |
前齿轮总成 (1) 凸轮轴齿轮和正时参考齿轮 (2) 惰轮 (3) 正时标记 (4) 曲轴齿轮 | |
正确的喷油正时和配气机构工作由正时参考齿轮和前齿轮总成的对中结果决定。 正时参考齿轮位于凸轮轴齿轮上。 正时参考齿轮用于测量曲轴转速。 前齿轮安装期间，惰轮齿轮 (2) 上的正时标记 (3) 必须与曲轴齿轮上的正时标记 (4) 及凸轮轴齿轮上的正时标记 (1) 对齐。
检查正时参考齿轮上的轮齿。 齿面不应有损伤。 齿缘应清洁锐利，齿上应无污物。
注: 重新组装前齿轮系后必须标定电子喷油正时。 请参阅故障诊断与排除, "发动机转速 / 正时传感器 - 标定"。
Caterpillar Information System:
3126B and 3126E Truck Engine Fuel System Pressure - Test
3126B Engines for Caterpillar Built Machines Turbocharger - Install
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Ether Injection System
3126B and 3126E Truck Engine Fuel System - Prime
C-10 and C-12 Industrial Engines Connecting Rod Bearing Journal
3126B and 3126E Truck Engine Fuel System - Inspect
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0100 - FMI 02 (for EUI Engines)
TK711, TK721, TK722 and TK732 Track Feller Bunchers Operator Station
325, 325B and 325L Excavators Travel Motor
2000/06/01 Field Returns of the Engine Speed Sensor are Necessary for Failure Analysis and Product Improvement {1907}
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Engine Speed/Timing Sensor
G3516B Engines MID 036 - CID 0320 - FMI 03 Speed/Timing Sensor short to +batt
325, 325B and 325L Excavators Travel Counterbalance Valve
325, 325B and 325L Excavators Oil Makeup (Travel System)
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Injector Solenoids
325, 325B and 325L Excavators Swivel
3126B Engines Inlet Manifold Pressure - Test
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Prelubrication System
3126B Engines Turbocharger - Inspect
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Excessive Valve Lash
2002/12/23 Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
C12 Marine Engines Speed/Timing Sensor
2000/07/01 Improved Tube Clips Reduce Vibration of Hydrax Actuator Oil Lines {1307, 1716}
3176C and 3196 Engines for Caterpillar Built Machines Engine Design