Inlet Manifold Pressure - Test
通过比较进气歧管的压力与技术营销信息(TMI)中给出的信息,即可检查发动机的效率。 应在发动机功率下降,但是发动机又没有切实的故障迹象时采用本测试。
TMI 中列出了进气歧管的正确压力。 这一信息是在下述工况下拟定的。
- 干式大气压力为 96 kPa (28.8 in Hg)
- 外部气温为 25
°C (77 °F)
- 燃油等级为 35 API
这些条件的任何变化都可能影响进气歧管的压力。 外部空气的温度可能会高于以上给出的数值,而大气压力可能会低于以上给出的数值。 这种情况会导致进气歧管压力的测量值低于技术销售信息资料(TMI)中的压力。 外部空气如果气温低于,大气压力高于以上给出的数值的话会导致进气歧管压力测量值高于技术销售信息资料(TMI)中的压力。
燃油密度差异也会使马力(失速速度)和增压压力发生变化。 如果燃油等级高于API比重等级35,进气歧管的压力可能会低于技术销售信息资料(TMI)中给出的压力。 如果燃油等级低于 35 API,进气歧管的压力可能会高于技术销售信息资料(TMI)中给出的压力。 确保检查压力时进气和排气不受阻。
注: Caterpillar 电子技师(ET)可被用来检查进气歧管压力。
Show/hide table
所需工具     | ||
---|---|---|
零件号     | 零件描述     | 数量     |
1U-5470 或者 198-4240     |
发动机压力表总成 或者 数字压力指示器     |
1     |
Show/hide table
图 1 | g00293196 |
1U-5470 发动机压力测试表总成 |
有关使用 1U-5470 发动机压力表总成 所需的说明,请参阅专门说明书, SEHS8907, "使用 1U-5470 发动机压力表总成 "。 有关使用 198-4240 数字显示压力指示器 所需的说明,请参阅操作手册, NEHS0818, "使用 198-4240 数字显示压力指示器 "。
Show/hide table
图 2 | g01140264 |
压力测试位置 (1) 旋塞 |
使用下述程序测量进气歧管压力:
- 将管塞 (1) 从进气口盖上拆下。
- 在进气口盖的测试位置上连接 1U-5470 发动机压力表总成 。
注: 需要 T 形管接头或某些其他管路部件才能将增压压力传感器连接到测试位置。
- 记录数值。
- 比较步骤 3 中记录的数值与 TMI 中给出的压力值。
Caterpillar Information System:
325, 325B and 325L Excavators Swivel
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Injector Solenoids
325, 325B and 325L Excavators Oil Makeup (Travel System)
325, 325B and 325L Excavators Travel Counterbalance Valve
3126B Engines Gear Group (Front) - Time
3126B and 3126E Truck Engine Fuel System Pressure - Test
3126B Engines for Caterpillar Built Machines Turbocharger - Install
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Ether Injection System
3126B and 3126E Truck Engine Fuel System - Prime
C-10 and C-12 Industrial Engines Connecting Rod Bearing Journal
3126B and 3126E Truck Engine Fuel System - Inspect
Electronic Modular Control Panel II+ (EMCP II+) GSC CID 0100 - FMI 02 (for EUI Engines)
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Prelubrication System
3126B Engines Turbocharger - Inspect
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Excessive Valve Lash
2002/12/23 Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
C12 Marine Engines Speed/Timing Sensor
2000/07/01 Improved Tube Clips Reduce Vibration of Hydrax Actuator Oil Lines {1307, 1716}
3176C and 3196 Engines for Caterpillar Built Machines Engine Design
3126B and 3126E Truck Engine Engine Oil Pressure Sensor - Test
G3516B Engines MID 036 - CID 0320 - FMI 08 Engine Speed/Timing signal abnormal
3126B and 3126E Truck Engine Engine Oil Pump - Inspect
3176C and 3196 Engines for Caterpillar Built Machines General Information
3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Speed Control