G3406 Engine Caterpillar

Valve Data Sheet

Usage:

G3406 1RK

Show/hide table

Table 1
Engine Model		Serial Number		Service Hours		Authorization
Cylinder	Cylinder Pressure	Valve Location		Current Measure	Baseline of the Stem	Baseline of the Rotator	Wear
1		Pushrod Side
		Exhaust Manifold
2		Pushrod Side
		Exhaust Manifold
3		Pushrod Side
		Exhaust Manifold
4		Pushrod Side
		Exhaust Manifold
5		Pushrod Side
		Exhaust Manifold
6		Pushrod Side
		Exhaust Manifold

Caterpillar Information System:

325, 325B and 325L Excavators Relief Valve (Crossover) - Test and Adjust

3176C and 3196 Engines for Caterpillar Built Machines Cooling System

G3406 Engine Reference Material

3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Speed Control

3176C and 3196 Engines for Caterpillar Built Machines General Information

3126B and 3126E Truck Engine Engine Oil Pump - Inspect

G3516B Engines MID 036 - CID 0320 - FMI 08 Engine Speed/Timing signal abnormal

3126B and 3126E Truck Engine Engine Oil Pressure Sensor - Test

3176C and 3196 Engines for Caterpillar Built Machines Engine Design

2000/07/01 Improved Tube Clips Reduce Vibration of Hydrax Actuator Oil Lines {1307, 1716}

C12 Marine Engines Speed/Timing Sensor

2002/12/23 Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}

325, 325B and 325L Excavators Travel Motor - Test

G3406 Engine Gas Pressure Regulator Condensation - Drain

G3516B Engines MID 036 - CID 0323 - FMI 03 Shutdown Lamp short to +batt

G3516B Engines MID 036 - CID 0324 - FMI 03 Warning Lamp short to +batt

3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Starting Motor System

C-12, C-15 and C-16 Engines for Caterpillar Built Machines CID 0342 FMI 02 Loss of Secondary Engine Speed signal

325, 325B and 325L Excavators Final Drive

G3516B Engines MID 036 - CID 0336 - FMI 02 Incorrect ECS Switch inputs

3034 Engine for Caterpillar Built Machines Basic Engine

3412 Generator Set Engines Speed/Timing Sensor

3500B Engines for Caterpillar Built Power Modules with the ADEM 2 Electronic Control Module Engine Speed/Timing Sensor - Calibrate

G3516B Engines MID 036 - CID 0443 - FMI 03 Crank Terminate Relay short to +batt