Cab Air Filter (Fresh Air) - Clean/Replace
The cab air filter is located on the underside of the frame on the right side of the machine.
- Remove the bolt and remove the air filter element.
- Inspect the air filter element. If the air filter element is dirty, replace the air filter element. If the air filter element is damaged or badly contaminated, replace the air filter element.
- Install the air filter element. Tighten the bolt.
Show/hide table
Illustration 1 | g01183629 |
The cab air filter is located inside the engine compartment on the right side.
- Open the engine access door.
- Inspect the air filter element. If the air filter element is dirty, replace the air filter element. If the air filter element is damaged or badly contaminated, replace the air filter element.
- Install the air filter element. Tighten bolt (1).
- Close the engine access door.
Show/hide table
Illustration 2 | g01169003 |
Caterpillar Information System:
M313C and M315C Excavators Joystick Controls
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Main Hydraulic System
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Implements and Swing Controls Alternate Patterns - If Equipped
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Relief Valve (Main)
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Blade Hydraulic System
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Hydraulic System Oil - Change
324D Excavator Hydraulic System Main Hydraulic System
325C LCR Excavator Machine Systems Platform - Remove
C9.3 Engines for Caterpillar Built Machines Engine Oil Pressure - Test
2005/05/30 The Bearing in the Fan Pump Is Improved {1387, 5073}
2011/03/09 An Improved Lifter Is Used for 3500 Engines with Mechanical Unit Injectors {1102, 1121, 1123}
M318C and M322C Excavators Machine Systems Cab Riser and Frame - Remove and Install
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Blade Linkage - Lubricate
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Boom and Stick Linkage - Lubricate
C9 Generator Set Fuel System Primary Filter (Water Separator) Element - Replace
325C LCR Excavator Machine Systems Platform - Install
2014/08/01 A New Fuel Transfer Pump Has Been Released {1256}
Replacing Tooth Holders on the Rotary Cutter Drum for the HM312 and HM315{0751, 6638} Replacing Tooth Holders on the Rotary Cutter Drum for the HM312 and HM315{0751, 6638}
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Pilot Valve (Joystick) - Remove
C4.4 Industrial Engine Burn Prevention
C4.4 Industrial Engine Engine Starting
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Travel Alarm - Test
M325D MH Material Handler Monitoring System
M325D MH Material Handler Storage and Literature Compartment