Boom and Stick Linkage - Lubricate
Note: Caterpillar recommends the use of 5% molybdenum grease for lubricating the boom and stick linkage. Refer to Special Publication, SEBU6250, "Caterpillar Machine Fluids Recommendations" for more information on grease.
Position the machine into the service position.
Wipe all fittings before you apply lubricant.
Show/hide table
| |
| Illustration 1 | g01169066 |
Apply lubricant to the grease fittings.
Caterpillar Information System:
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Blade Linkage - Lubricate
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Cab Air Filter (Fresh Air) - Clean/Replace
M313C and M315C Excavators Joystick Controls
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Main Hydraulic System
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Implements and Swing Controls Alternate Patterns - If Equipped
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Relief Valve (Main)
301.6C and 301.8C Mini Hydraulic Excavators Hydraulic System Blade Hydraulic System
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Hydraulic System Oil - Change
324D Excavator Hydraulic System Main Hydraulic System
325C LCR Excavator Machine Systems Platform - Remove
C9.3 Engines for Caterpillar Built Machines Engine Oil Pressure - Test
2005/05/30 The Bearing in the Fan Pump Is Improved {1387, 5073}
C9 Generator Set Fuel System Primary Filter (Water Separator) Element - Replace
325C LCR Excavator Machine Systems Platform - Install
2014/08/01 A New Fuel Transfer Pump Has Been Released {1256}
Replacing Tooth Holders on the Rotary Cutter Drum for the HM312 and HM315{0751, 6638} Replacing Tooth Holders on the Rotary Cutter Drum for the HM312 and HM315{0751, 6638}
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Pilot Valve (Joystick) - Remove
C4.4 Industrial Engine Burn Prevention
C4.4 Industrial Engine Engine Starting
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Travel Alarm - Test
M325D MH Material Handler Monitoring System
M325D MH Material Handler Storage and Literature Compartment
M325D MH Material Handler Cab Door
M318C and M322C Excavators Engine Supplement Electric Starting Motor - Remove and Install