Installation Procedure
Show/hide table
Table 1
Required Tools     |
Tool     |
Part Number     |
Part Description     |
Qty     |
A     |
138-7573     |
Link Bracket     |
4     |
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Show/hide table
|
NOTICE |
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
|
Show/hide table
|
|
|
Illustration 1 | g01167760 |
- Install alignment pins (41) in hub (38) .
- Install inserts (39) and bolts (40) .
Show/hide table
|
|
|
Illustration 2 | g01167759 |
- Install coupling assembly (37) on main hydraulic pump (14) .
- Install setscrews (36) .
Show/hide table
|
|
|
Illustration 3 | g01167758 |
- Install alignment pins (34) and (35) in the flywheel.
Show/hide table
|
|
|
Illustration 4 | g01167757 |
- Install inserts (33) and bolts (32) .
Show/hide table
|
|
|
Illustration 5 | g01167753 |
- Install coupling element (31) .
Show/hide table
|
|
|
Illustration 6 | g01167747 |
- Use Tooling (A) and a suitable lifting device to position main hydraulic pump (14). The weight of main hydraulic pump (14) is approximately 250 kg (550 lb).
- Install bolts (30) .
Show/hide table
|
|
|
Illustration 7 | g01167730 |
- Install support assemblies (28) and (29) .
Show/hide table
|
|
|
Illustration 8 | g01167729 |
- Connect tube assembly (27) .
- Connect hose assemblies (26) and (25) .
- Position filter assembly (24) and install bolts (23) .
Show/hide table
|
|
|
Illustration 9 | g01167728 |
- Connect hose assemblies (22) and (21) .
- Install bracket assemblies (20) and (19) and bolts (18) .
Show/hide table
|
|
|
Illustration 10 | g01167727 |
- Connect hose assemblies (17) .
- Install bracket assembly (16) to the main hydraulic pump (14) and connect harness assemblies (15) .
- Install cover (13) .
Show/hide table
|
|
|
Illustration 11 | g01167720 |
- Use two people to install support assembly (10). The weight of support assembly (10) is approximately 27 kg (60 lb).
- Connect hose assembly (8) .
- Install covers (12) and (7), supports (11) and (9), hand hold (6), and mirror mounting bracket (5) .
Show/hide table
|
|
|
Illustration 12 | g01167719 |
- Connect hose assemblies (4), (3), (2), and (1) .
- Refill the hydraulic tank with oil. Refer to Operation and Maintenance Manual, "Refill Capacities".
End By:
Install the muffler. Refer to Disassembly and Assembly, "Muffler - Install".