Correction to Specifications Module, SENR6557-01, "3100 HEUI Diesel Truck Engine" {1105}
- Truck Engines:
- 3116 (S/N: 8WL1-UP; 2CW1-UP)
- 3126 (S/N: 1WM1-UP; 4ES1-UP; 8HW1-UP; 7LZ1-UP)
Callout (14) is the distance from the head of the valve to the cylinder head face when the valve is closed. The minimum value of the dimension for the exhaust valve should be 1.51 mm (0.059 inch). The maximum value of the dimension for the exhaust valve should be 2.22 mm (0.087 inch).
Caterpillar Information System:
3512B Marine Auxiliary Engine Engine Speed/Timing Sensor - Remove and Install
3500B and 3500B High Displacement Generator Set Engines Monitoring System Parameters
2004/08/02 New Cab Air Filters Provide Improved Efficiency and Odor Reduction {7309, 7320, 7342}
3500B and 3500B High Displacement Generator Set Engines Calibration
2000/02/01 Check The 163-3266 Time Delay Relay If There Is An Unexplained Engine Shutdown {7451}
3500B Locomotive Engines System Configuration Parameters
3516B and 3516B HD Engines and 994D, 994F, and 994H Wheel Loaders Engine Design
Alternator - Delco 27SI Charging System
HDB Series and M1 Series Heavy Duty Brushless Alternators General Information
3408E and 3412E Engines for Caterpillar Built Machines Electrical System
3126B Engines Unit Injector - Test
3176C and 3196 Industrial Engines Engine Design
3126B Engines Exhaust Temperature - Test
3500 Generator Set Engines Fuel Pressure - Diesel System
3126B Engines Aftercooler - Test
3524B Engines for 797 and 797B Off-Highway Trucks Camshaft Timing
Installation Instructions for Piston Packs{1225, 1239} Installation Instructions for Piston Packs{1225, 1239}
3126B Engines Engine Crankcase Pressure (Blowby) - Test
3524B Engines for 797 and 797B Off-Highway Trucks Fuel Injector Adjustment
3126B Engines Engine Valve Lash - Inspect/Adjust
3412E and C30 Marine Engines Overhaul (Top End)
3408E and 3412E Engines for Caterpillar Built Machines Fuel System - Inspect
The Installation of an ADEM 2000 on C-10, C-12, 3406E, C-15, or C-16 Truck Engines into a 1998 and Earlier Model ADEM ll on C-10, C-12, or 3406E Chassis{1000, 1408, 1901, 1920} The Installation of an ADEM 2000 on C-10, C-12, 3406E, C-15, or C-16 Truck Engines into a 1998 and Earlier Model ADEM ll on C-10, C-12, or 3406E Chassis{1000, 1408, 1901, 1920}
Procedure For Replacing The Software For The Timing Control Module{1901} Procedure For Replacing The Software For The Timing Control Module{1901}