Fuel Filter Base - Remove and Install
拆卸步骤
Show/hide table
 |
渗漏或溅溢到热表面或电气部件上的燃油会引起失火。 为防止可能的伤害，当更换燃油滤清器或油水分离器滤芯时，要将起动开关断开。 应立即将溅溢的燃油清除干净。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修产品时，务必留心，确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前，要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品，参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
- 断开软管组件 (1) 和软管组件 (3) 。
Show/hide table
 | |
| 图 1 | g01152090 |
- 断开线束组件 (2) 。
- 拆下螺栓 (5) 和燃油滤清器底座 (4) 。
安装步骤
- 将燃油滤清器底座 (4) 安置在发动机上。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| | |
| 图 2 | g01152090 |
- 安装螺栓 (5) 。
- 连接线束组件 (2) 。
- 连接软管组件 (3) 和软管组件 (1) 。
Caterpillar Information System:
325C Excavator Joystick Controls Alternate Patterns - If Equipped
D Series Excavator Monitoring System Device Test Mode
D Series Excavator Monitoring System System Schematic
325C LCR Excavator Machine Systems Electronic Control (Heater and Air Conditioner) - Remove and Install
345C Excavator and 345C Material Handler Machine System Specifications Stick - 7.4 m (24.28 ft)
302.5C Mini Hydraulic Excavator Machine System Specifications Swivel
325C LCR Excavator Machine Systems Seat - Remove and Install
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System Medium Pressure Hydraulic System
325C LCR Excavator Hydraulic System Hydraulic Oil Cooler
365C and 385C Excavators and 365C MHPU and 385C MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0374 - FMI 06
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System Machine Working Function
365C and 385C Excavators and 365C MHPU and 385C MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1148 - FMI 05
365C and 385C Excavators and 365C MHPU and 385C MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1147 - FMI 06
365C and 385C Excavators and 365C MHPU and 385C MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1148 - FMI 06
C7 Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump - Remove
345C Material Handler Hydraulic System Generator Set Control
C7 Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump - Install
D Series Excavator Monitoring System Override Mode
C7 Engines for Caterpillar Built Machines Turbocharger - Remove
C7 Engines for Caterpillar Built Machines Turbocharger - Install
2006/03/06 The Blade Assembly Has Been Improved on Mini Hydraulic Excavators {6051, 6060}
VVP10, VVP15, VVP25 and VVP45 Vibratory Plate Compactors Safety Messages
D Series Excavator Monitoring System Tool Program Mode
C7 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install