325C LCR Excavator Machine Systems Caterpillar

Removal Procedure

1. Open the cab door. Lock the cab door in the OPEN position.

2. Position the seat to the rear position. Tilt the back of the seat forward.

3. If the seat is equipped with a heater, disconnect the harness assembly to the heater.

Show/hide table



Illustration 1	g01151942

4. Remove bolts (1) .

5. Reposition the seat to the forward position.

Show/hide table



Illustration 2	g01151943

6. Remove bolts (2) from seat assembly (3). Remove the seat assembly (3) from the cab. The weight of seat assembly (3) is approximately 32 kg (70 lb).

Installation Procedure

Show/hide table



Illustration 3	g01151943

1. Position seat assembly (3) in the cab. The weight of seat assembly (3) is approximately 32 kg (70 lb). Install bolts (2) .

2. Position the seat to the rear position. Tilt the back of the seat forward.

Show/hide table



Illustration 4	g01151942

3. Install bolts (1) .

4. If the seat is equipped with a heater, connect the harness assembly to the heater.

5. Sit in the seat assembly with the operator's back against the back of the seat assembly. Adjust the seat assembly so that the operator is able to move the pedals completely forward and rearward. Refer to the Operation and Maintenance Manual, "Seat and Console Adjustment" for more information.

6. Close the door to the cab.