Generator Set Control
Show/hide table
 | |
| Illustration 1 | g01152146 |
(1) Return line (2) Case drain line (3) Generator pump (4) Line (5) Line (6) Filter (case drain for generator motor) (7) Generator motor (8) Drive pump (9) Hydraulic tank | |
Generator pump (3) is a gear pump that is coupled to drive pump (8). Generator pump (8) rotates whenever the engine is running. Generator motor (7) is a piston motor.
Generator pump (3) gets oil from hydraulic tank (9) through line (5). Oil from generator pump (3) flows through line (4) and the oil enters the motor. The oil causes generator motor (7) to rotate. Return oil from the motor flows through return line (1) to hydraulic tank (9) .
Case drain oil from the motor flows through filter (6) and returns to hydraulic tank (9).
Caterpillar Information System:
C7 Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump - Remove
365C and 385C Excavators and 365C MHPU and 385C MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1148 - FMI 06
365C and 385C Excavators and 365C MHPU and 385C MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 1147 - FMI 06
C7 Engines for Caterpillar Built Machines Fuel Filter Base - Remove and Install
325C Excavator Joystick Controls Alternate Patterns - If Equipped
D Series Excavator Monitoring System Device Test Mode
D Series Excavator Monitoring System System Schematic
325C LCR Excavator Machine Systems Electronic Control (Heater and Air Conditioner) - Remove and Install
345C Excavator and 345C Material Handler Machine System Specifications Stick - 7.4 m (24.28 ft)
302.5C Mini Hydraulic Excavator Machine System Specifications Swivel
325C LCR Excavator Machine Systems Seat - Remove and Install
M313C, M315C, M316C, M318C, M318C MH, M322C and M322C MH Excavators Electronic System Medium Pressure Hydraulic System
C7 Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump - Install
D Series Excavator Monitoring System Override Mode
C7 Engines for Caterpillar Built Machines Turbocharger - Remove
C7 Engines for Caterpillar Built Machines Turbocharger - Install
2006/03/06 The Blade Assembly Has Been Improved on Mini Hydraulic Excavators {6051, 6060}
VVP10, VVP15, VVP25 and VVP45 Vibratory Plate Compactors Safety Messages
D Series Excavator Monitoring System Tool Program Mode
C7 Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
VVP10, VVP15, VVP25 and VVP45 Vibratory Plate Compactors Approved Machines
M325D Material Handler Machine Systems Stick - Remove
365C and 385C Excavators and 365C MHPU and 385C MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0376 - FMI 06
345C Excavator Tool Control System System Identification