345B Series II Excavator Caterpillar


Additional Messages

Usage:

345B II CCC



Illustration 1g00937179



Illustration 2g01144863

Radial Air Cleaner (1)

This message is located on the cover of the air cleaner.




Illustration 3g00911166

In order to avoid engine damage, replace old filters with radial seal air filters. Other replacement filters will not seal.

The location and design of the gasket for the radial seal air filter is critical to the proper operation of the air cleaner element. Use only Caterpillar replacements.

No Step (2)

This message is located on the engine cover on the top of the machine.




Illustration 4g00911158

Do not step in this area.

Clean Glass (3)

This message is located on the upper window in the cab.




Illustration 5g00911414


NOTICE

Clean windows with a wet cloth or sponge. Dry cloth or sponge may scratch window material.


Alternate Exit (4)

This message is located in the upper right corner of the rear window.




Illustration 6g00911175

If the Primary exits are blocked, pull the ring in order to open the rear window. Exit the machine through the window.

Machine Security System (5)

This message is located on the window on the right side of the cab.




Illustration 7g00951606

This machine may be equipped with a security system. Read the Operation and Maintenance Manual before you operate the machine.

Key in Run Position (6)

This message is located on the window on the right side of the cab.




Illustration 8g00915002


NOTICE

Key must be in run position with engine running to maintain electrical and hydraulic functions and prevent serious machine damage.


Caterpillar Information System:

330C Excavator Hydraulic System Engine Performance - Test - Engine Speed
VHS10, VHS30, VHS40, VHS50, VHS60 and VHS70 Work Tools Cutters - Inspect/Replace
330C Excavator Hydraulic System Main Hydraulic Pump Air - Purge
330C Excavator Hydraulic System Hydraulic System Pressure - Release
302.5C Mini Hydraulic Excavator Machine System Specifications Blade Lift Cylinder
C9 Engines for Caterpillar Built Machines Cooling System - Test
302.5C Mini Hydraulic Excavator Machine System Specifications Swing Boom Cylinder
C9 Engines for Caterpillar Built Machines Lubrication System
C15 and C18 Engines for Caterpillar Built Machines CID 1421 FMI 09 Unable to communicate with Rear Engine ECM
C9 Engines for Caterpillar Built Machines General Information
M325C Excavator Engine Supplement Oil Pan - Remove and Install - Engine in Chassis
C11 and C13 Engines Engine Mounting
330C Excavator Hydraulic System Travel on Level Ground - Test - Optional Test
365C Front Shovel Hydraulic System Cylinder Drift - Check - Loaded Bucket
330C Excavator Hydraulic System Travel on Level Ground - Test
345C Material Handler Hydraulic System Return Hydraulic System
330C Excavator Hydraulic System Machine Drift on a Slope - Check
330C Excavator Hydraulic System Swing Speed and Overswing on Level Ground - Check
330C Excavator Hydraulic System Swing Speed and Swing Drift on a Slope - Check
330C Excavator Hydraulic System Relief Valve (Pilot) - Test and Adjust
330C Excavator Hydraulic System Accumulator (Pilot) - Test and Charge
330C Excavator Hydraulic System Relief Valve (Main) - Test and Adjust
330C Excavator Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
330C Excavator Hydraulic System Relief Valve (Swing) - Test and Adjust
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.