V-Belts - Remove and Install
Removal Procedure
- Loosen bolts (3) and (5) .
Show/hide table
 | |
| Illustration 1 | g00676201 |
- Loosen the nuts (6) so the alternator (4) releases the tension on the V-Belt (2) .
- Remove the V-Belt (2) .
Installation Procedure
- Install the V-Belt (2) on the alternator (4) .
- Adjust the nuts (6) so that tension is placed on the V-Belt (2) .
Note: Refer to the Operation and Maintenance Manual for the adjustment procedure.
Show/hide table
| | |
| Illustration 2 | g00676201 |
- Tighten the bolts (3) and (5) .
Caterpillar Information System:
2000/02/01 Caterpillar Engine Electronics Now Has Many New Features {1900}
3512 and 3516 EUI Engines for Caterpillar Built Machines Fuel System Operation
3176C and 3196 Marine Engines Alternator - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Injection Actuation Pressure Control Valve Circuit - Test
3500B High Displacement Locomotive Engines High Coolant Temperature
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Idle Shutdown Timer - Test
3500B High Displacement Locomotive Engines Engine Overspeed Control
3408E and 3412E Engines for Caterpillar Built Machines Piston and Rings
723PLUS Digital Speed Control Hand Held Programmer and Menus
3408E and 3412E Engines for Caterpillar Built Machines Vibration Damper and Pulley
345B, 345B Series II and W345B Series II Excavators Machine Systems Stick Bearings and Seals - Install
2000/02/01 New Control Strategy Improvements For G3600 Engines {1900}
3500B High Displacement Locomotive Engines Crankshaft
3500B High Displacement Locomotive Engines Camshaft
3176C and 3196 Marine Engines Transmission Oil Cooler - Remove and Install
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Warning Lamp Circuit - Test
2000/02/01 Correction to Guideline for Reusable Parts and Salvage Operations, SEBF8192-02 {1201}
G3406 Engine Charging System
3176C and 3196 Marine Engines Aftercooler - Remove
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Check Engine Lamp Circuit - Test
3176C and 3196 Industrial Engines Cylinder Head - Install
Replacing the Transformer in the Automatic Transfer Switch{4469} Replacing the Transformer in the Automatic Transfer Switch{4469}
3176C and 3196 Marine Engines Aftercooler - Install
C15 and C18 Petrolem Generator Set Engines Factory Passwords