Usage:
1. Put identification marks on the wires for the electric starting motor as to their location on the electric starting motor. Disconnect all wires (3) from the electric starting motor.
2. Use two persons to remove the electric starting motor. The weight of the electric starting motor is approximately 29 kg (64 lb). Remove three bolts (1) and electric starting motor (2) from the flywheel housing. Check the condition of the gasket for the electric starting motor. If necessary, make a replacement.
NOTE: The following steps are for installation of the electric starting motor.
3. Put the gasket and electric starting motor (2) in position on the flywheel housing, and install bolts (1) to hold it.
4. Connect all wires (3) to the electric starting motor.