Fan Drive
Usage:
Remove & Install Fan Drive
Start By:
a. remove fan adapter
1. Remove two bolts (1) and retainer (2).
2. Pull the fan drive and fan pulley (3) as a unit from fan drive mounting shaft (5).
3. Separate fan pulley (3) from fan drive (6).
NOTE: For installation of the fan drive, reverse the removal steps.
End By:
a. install fan adapter
Caterpillar Information System:
3306B GENERATOR SET ENGINE Fan Adapter
3306B GENERATOR SET ENGINE Fan
3306B GENERATOR SET ENGINE Alternator
3306B GENERATOR SET ENGINE V-Belts
3306B GENERATOR SET ENGINE Aftercooler
3306B GENERATOR SET ENGINE Oil Level Gauge
3306B GENERATOR SET ENGINE Radiator
3306B GENERATOR SET ENGINE Oil Filler Cap
3306B GENERATOR SET ENGINE Crankcase Breather
3306B GENERATOR SET ENGINE Control Panel
3306B GENERATOR SET ENGINE Fuel Pressure Gauge
3306B GENERATOR SET ENGINE Precleaner
3306B GENERATOR SET ENGINE Engine Lift Brackets
3306B GENERATOR SET ENGINE Electric Starting Motor
3306B GENERATOR SET ENGINE Fuel Injection Lines
3306B GENERATOR SET ENGINE Fuel Injection Nozzles
3306B GENERATOR SET ENGINE Fuel Injection Pump Housing & Governor
3306B GENERATOR SET ENGINE Governor
3306B GENERATOR SET ENGINE Fuel Injection Pumps
3306B GENERATOR SET ENGINE Fuel Injection Pump Housing
3306B GENERATOR SET ENGINE Fuel Transfer Pump
3306B GENERATOR SET ENGINE Oil Filter & Oil Filter Base
3306B GENERATOR SET ENGINE Oil Filter Base
3306B GENERATOR SET ENGINE Fuel Priming Pump & Base