Fan Adapter
Usage:
Remove & Install Fan Adapter
Start By:
a. remove fan
b. remove v-belts
1. Remove six mounting bolts (1).
2. Remove fan drive (2) from pulley (4). Remove O-ring seal (3) from fan drive (2).
NOTE: For installation of the fan adapter, reverse the removal steps.
End By:
a. install v-belts
b. install fan
Caterpillar Information System:
3306B GENERATOR SET ENGINE Fan
3306B GENERATOR SET ENGINE Alternator
3306B GENERATOR SET ENGINE V-Belts
3306B GENERATOR SET ENGINE Aftercooler
3306B GENERATOR SET ENGINE Oil Level Gauge
3306B GENERATOR SET ENGINE Radiator
3306B GENERATOR SET ENGINE Oil Filler Cap
3306B GENERATOR SET ENGINE Crankcase Breather
3306B GENERATOR SET ENGINE Control Panel
3306B GENERATOR SET ENGINE Fuel Pressure Gauge
3306B GENERATOR SET ENGINE Precleaner
3306B GENERATOR SET ENGINE Air Filter Elements
3306B GENERATOR SET ENGINE Fan Drive
3306B GENERATOR SET ENGINE Engine Lift Brackets
3306B GENERATOR SET ENGINE Electric Starting Motor
3306B GENERATOR SET ENGINE Fuel Injection Lines
3306B GENERATOR SET ENGINE Fuel Injection Nozzles
3306B GENERATOR SET ENGINE Fuel Injection Pump Housing & Governor
3306B GENERATOR SET ENGINE Governor
3306B GENERATOR SET ENGINE Fuel Injection Pumps
3306B GENERATOR SET ENGINE Fuel Injection Pump Housing
3306B GENERATOR SET ENGINE Fuel Transfer Pump
3306B GENERATOR SET ENGINE Oil Filter & Oil Filter Base
3306B GENERATOR SET ENGINE Oil Filter Base