G3500 Industrial Engines Caterpillar


Engine Timing Does Not Match Programmed Timing

Usage:

G3508 2JF

Probable Causes

Note: Note the conditions that caused the problem. Troubleshooting the symptom under other conditions can give misleading results.

  • The timing is retarded due to detonation.

  • The speed timing map is retarding timing.

  • Magneto interface signal

Recommended Repairs

Detonation Retarded Timing

Check the Timing Control Module (TCM) for illumination of the yellow "DETONATION RETARDED TIMING" indicator. Refer to Troubleshooting, "Dtonaiton Retard and Detonation Shutdown".

Speed Timing Map

Use the DDT and check the value of the speed timing map. Refer to Troubleshooting, "Programming the TCM".

Magneto Interface Signal

Check the magneto interface signal. Refer to Troubleshooting, "No Mageto Interface Signal".

Caterpillar Information System:

3608 Engine Camshaft Timing
G3500 Industrial Engines Engine Shutdown
3054B Industrial Engine Engine Oil Filter Base - Disassemble
G3500 Industrial Engines Engine Misfires, Runs Rough or Is Unstable
3054B Industrial Engine Engine Oil Filter Base - Install
3054B Industrial Engine Engine Oil Filter Base - Remove
G3500 Industrial Engines Engine Cranks but Will Not Start
G3500 Industrial Engines Engine Will Not Crank
3608 Engine Fuel Injector Testing
G3500 Industrial Engines Symptoms
3608 Engine Fuel Pressure
1999/12/06 New Service Magazine Format {0374, 1000, 7000}
G3500 Industrial Engines Intermittent Engine Shutdown
G3500 Industrial Engines DDT Does Not Communicate with the TCM System
G3500 Industrial Engines Diagnostic Codes
1999/12/20 Change to Tightening Procedure for Cylinder Head Bolts in Specifications, RENR1217 and Specifications, SENR5182 {1100}
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0261 FMI 13 Engine Timing Calibration required
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0001 FMI 05 Cylinder #1 Injector open circuit
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0001 FMI 06 Cylinder #1 Injector short
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0002 FMI 05 Cylinder #2 Injector open circuit
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0003 FMI 05 Cylinder #3 Injector open circuit
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0004 FMI 05 Cylinder #4 Injector open circuit
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0005 FMI 05 Cylinder #5 Injector open circuit
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0006 FMI 05 Cylinder #6 Injector open circuit
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.