Engine Oil Filter Base - Install
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove the caps and the plugs from the openings.
- Put engine oil filter base (4) in position on the cylinder block.
Show/hide table
Illustration 1 | g00762421 |
- Install four bolts (1) that fasten engine oil filter base (4) to the cylinder block.
- Connect the two coolant hoses to the oil cooler and tighten two hose clamps (3) .
- Install new engine oil filter (2) on engine oil filter base (4) .
Caterpillar Information System:
3054B Industrial Engine Engine Oil Filter Base - Remove
G3500 Industrial Engines Engine Cranks but Will Not Start
G3500 Industrial Engines Engine Will Not Crank
3608 Engine Fuel Injector Testing
G3500 Industrial Engines Symptoms
3608 Engine Fuel Pressure
1999/12/06 New Service Magazine Format {0374, 1000, 7000}
3512B Petroleum Engines with the ADEM 2 Electronic Control Module Factory Passwords Worksheet
3608 Engine Grounding Practices
3608 Engine Manual Barring Group
3608 Engine Crankcase Explosion Relief Valves
3608 Engine Camshaft
G3500 Industrial Engines Engine Misfires, Runs Rough or Is Unstable
3054B Industrial Engine Engine Oil Filter Base - Disassemble
G3500 Industrial Engines Engine Shutdown
3608 Engine Camshaft Timing
G3500 Industrial Engines Engine Timing Does Not Match Programmed Timing
G3500 Industrial Engines Intermittent Engine Shutdown
G3500 Industrial Engines DDT Does Not Communicate with the TCM System
G3500 Industrial Engines Diagnostic Codes
1999/12/20 Change to Tightening Procedure for Cylinder Head Bolts in Specifications, RENR1217 and Specifications, SENR5182 {1100}
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0261 FMI 13 Engine Timing Calibration required
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0001 FMI 05 Cylinder #1 Injector open circuit
3456 Engine, 836G Landfill Compactor, 834G Wheel Dozer and 988G Wheel Loader CID 0001 FMI 06 Cylinder #1 Injector short