No Diagnostic Code Detected (55)
产生此代码的情况:
闪烁代码 55 显示自从上次通电以来系统没有检测到任何故障。
系统响应:
此代码不会出现在卡特彼勒电子技师 (ET) 上。 检查发动机指示灯被用来显示闪烁代码。 更多关于闪烁代码的信息,参见故障诊断与排除, "检查发动机指示灯电路 - 测试"。
无
不需要进行故障诊断与排除。
测试步骤 1.
结果:
- 正常 - 停止
Caterpillar Information System:
3608 Engine Sea Water Strainer - Clean/Inspect
3114, 3116, and 3126 Engines for Caterpillar Built Machines Fuel Injection Control Linkage - Install
Customer Communication Module (CCM) for Diesel Engines Initialization for Remote Connection with Modem
3114, 3116, and 3126 Engines for Caterpillar Built Machines Fuel Injection Control Linkage - Remove
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines 0110-11 Very High Coolant Temperature (61)
Customer Communication Module (CCM) for Diesel Engines Initialization for Direct Connection
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines 0110-00 High Coolant Temperature Warning (61)
3406E, C-10 and C-12 On-highway Engines 0105-11 Very High Intake Manifold Air Temperature (64)
Customer Communication Module (CCM) for Diesel Engines Password - Enable and Disable
Customer Communication Module (CCM) for Diesel Engines Reference Material
3406E, C-10 and C-12 On-highway Engines 0105-00 High Intake Manifold Air Temperature Warning (64)
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines 0100-11 Very Low Oil Pressure (46)
3608 Engine Engine Oil - Change
SR500 Generators Voltage Connections
3608 Engine Heat Exchanger - Clean
3608 Engine Fuel System Primary Filter - Clean
3608 Engine Fuel System Secondary Filter - Replace
3608 Engine Engine Mounts - Inspect
3608 Engine Reference Material
3126B Engine for Caterpillar Built Machines Exhaust Temperature Is Too High
3508B, 3512B, and 3516B High Displacement Generator Sets Generator Start-up Checklist
3114, 3116, and 3126 Engines for Caterpillar Built Machines Unit Injector - Install
3054B Industrial Engine General Information
3114, 3116, and 3126 Engines for Caterpillar Built Machines Unit Injector Sleeve - Install