Fuel Injection Control Linkage - Remove
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 136-4149     | 调速器钳     | 1     |
开始:
- 拆下摇臂轴组件和推杆。 请参阅拆解和组装, "摇臂轴和推杆 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 拆下夹子 (4) 。 夹子 (4) 位于调速器和缸盖之间。
Show/hide table
图 1 | g00613071 |
- 使用工具 (A) 将管组件 (5) 滑到缸盖中。
Show/hide table
图 2 | g00655975 |
- 拆卸夹子,然后使用工具 (A) 拆下 U 形夹销 (6) 。 U 形夹销 (6) 将调速器连接至喷油控制连杆的操纵杆。
注: U 形夹销 (6) 必须停留在调速器内以进行调整。
Show/hide table
图 3 | g00613149 |
- 拆卸螺栓 (1) ,然后拆卸喷油控制连杆 (2) 。 操纵杆 (3) 将喷油控制连杆 (2) 连接至调速器。
注: 有关操纵杆 (3) 检查步骤的信息,请参阅专门说明书, REHS0601, "102-7459 喷油控制连杆和 4P-9048 喷油控制连杆的检查和改装"。
Show/hide table
图 4 | g00630566 |
Caterpillar Information System:
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines 0110-11 Very High Coolant Temperature (61)
Customer Communication Module (CCM) for Diesel Engines Initialization for Direct Connection
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines 0110-00 High Coolant Temperature Warning (61)
3406E, C-10 and C-12 On-highway Engines 0105-11 Very High Intake Manifold Air Temperature (64)
Customer Communication Module (CCM) for Diesel Engines Password - Enable and Disable
Customer Communication Module (CCM) for Diesel Engines Reference Material
3406E, C-10 and C-12 On-highway Engines 0105-00 High Intake Manifold Air Temperature Warning (64)
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines 0100-11 Very Low Oil Pressure (46)
3512 Industrial Engine Maintenance Interval Schedule
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines 0100-01 Low Oil Pressure Warning (46)
3512 Industrial Engine Reference Numbers
SR4 and SR4B Generators and Control Panels Reference Numbers
Customer Communication Module (CCM) for Diesel Engines Initialization for Remote Connection with Modem
3114, 3116, and 3126 Engines for Caterpillar Built Machines Fuel Injection Control Linkage - Install
3608 Engine Sea Water Strainer - Clean/Inspect
3406E, C-10 and C-12 On-highway Engines No Diagnostic Code Detected (55)
3608 Engine Engine Oil - Change
SR500 Generators Voltage Connections
3608 Engine Heat Exchanger - Clean
3608 Engine Fuel System Primary Filter - Clean
3608 Engine Fuel System Secondary Filter - Replace
3608 Engine Engine Mounts - Inspect
3608 Engine Reference Material
3126B Engine for Caterpillar Built Machines Exhaust Temperature Is Too High