| |
| Illustration 1 | g00846309 |
The fuse panel is located inside the access cover on the left front side of the seat support. Open the access cover for fuse access.
|
Fuses - Fuses protect the electrical system from damage that is caused by overloaded circuits. Change a fuse if the element separates. If the element of a new fuse separates, check the circuit and/or repair the circuit. |
| NOTICE |
|---|
|
Always replace fuses with the same type and capacity fuse that was removed. Otherwise, electrical damage could result. |
| NOTICE |
|---|
|
If it is necessary to replace fuses frequently, an electrical problem may exist. Contact your Caterpillar dealer. |
To replace a fuse, use a puller that is stored in the fuse panel. The following spare fuses are contained in the fuse panel:
- 10 Amperes
- 20 Amperes
- 30 Amperes
The following list identifies the circuits that are protected by each fuse. The amperage for each fuse is included with each circuit.
| |
| Illustration 2 | g00825420 |
(1) Horn - 10 Amp
(2) Spare - 10 Amp
(3) Travel Alarm - 10 Amp
(4) Dome Light and Radio - 20 Amp
(5) Hydraulic System and Fuel Shutoff - 10 Amp
(6) Engine Start - 30 Amp
(7) Heater and Air Conditioner - 20 Amp
(8) Windshield Washer and Lighter - 20 Amp
(9) Engine Speed - 20 Amp
(10) Beacon - 10 Amp
(11) Panel Dimmer - 10 Amp
(12) Spare - 20 Amp
(13) Spare - 30 Amp
(14) Work Lights - 10 Amp