Fuel Tank Water and Sediment - Drain
The fuel tank drain valve is located underneath the fuel tank.
Note: Move the upper structure 90 degrees in order to access the fuel tank drain valve. Access the fuel tank drain valve by walking between the tracks of the machine.
- Open the drain valve by turning the valve counterclockwise. Allow the water and the sediment to drain into a suitable container.
Note: Dispose of drained fluids according to local regulations.
Show/hide table
Illustration 1 | g00687138 |
Note: Refer to Operation and Maintenance Manual, "General Hazard Information" for information on containing fluid spillage.
- Close the drain valve by turning the valve clockwise.
Fill the Fuel Tank
You can now add fuel to the fuel tank, if necessary. Remove the fuel tank cap and pump fuel through the opening.
Make sure that you lock the fuel tank cap after the refueling is complete.
Caterpillar Information System:
330C Forest Machine Hydraulic System Pump Control (Negative Flow) - Adjust
385B and 5090B Excavators Engine Supplement Muffler - Remove and Install
330C Forest Machine Hydraulic System Pump Control (Output Flow) - Adjust
385B Excavator Machine System Specifications Bucket Cylinder
312C Excavator Machine Systems Solenoid Valve (Rotate) - Remove
303 CR Mini Hydraulic Excavator Fuel Tank Cap and Strainer - Clean
5230B Excavator Machine Systems Bucket Cylinder - Disassemble - Bottom Dump Cylinder for the Front Shovel
5230B Excavator Machine Systems Bucket Cylinder - Disassemble - Front Shovel
5230B Excavator Machine Systems Bucket Cylinder - Disassemble - Mass Excavator
385B Excavator Machine System Specifications Bucket Cylinder Lines
CVP16, CVP40, CVP75 and CVP110 Vibratory Plate Compactors Control Manifold - Remove
303 CR Mini Hydraulic Excavator Fuel Tank Water and Sediment - Drain
385C Excavator and 385C Front Shovel Machine System Specifications Bucket Cylinder
303 CR Mini Hydraulic Excavator Fuses - Replace
312C Excavator Machine Systems Solenoid Valve (Rotate) - Install
5110B, 5110B L and 5110B MH Excavator Hydraulic System Pilot Manifold
5230B Excavator Machine Systems Pilot Manifold - Install
385B Excavator Fuel Tank Shutoff and Drain Control
385B and 5090B Excavators Machine System Specifications Bucket Cylinder
330C Excavator Machine System Specifications Air Conditioner Lines
5230B Excavator Engine Supplement Radiator - Remove
385B and 5090B Excavators Engine Supplement Electric Starting Motor - Remove and Install
385B and 5090B Excavators Engine Supplement Engine Enclosure Group - Remove and Install
325C Excavator Seat