Special Instruction, REHS0872 , "Installation of the 194-1522 Hydraulic Kit " is Available {5057, 6129}
- Work Tool:
- QUICK COUPLER (S/N: 7WW1-UP; APE1-UP; ARJ1-UP; ATH1-UP; BCJ1-UP)
The Special Instruction, REHS0872, "Installation of the 194-1522 Hydraulic Kit " is available.
This Special Instruction provides the procedure for installing the hydraulic kit to the 950G Wheel Loader and the 962G Wheel Loader and to the quick coupler.
The Special Instruction, REHS0872, "Installation of the 194-1522 Hydraulic Kit " can be obtained through the normal literature ordering channels. The publication can also be found on the Caterpillar Service Information System (SIS).
Caterpillar Information System:
M325B Material Handler Machine Systems Hydraulic Swivel - Install
320B Excavator Machine System Specifications Bucket Cylinder Lines
3408E and 3412E Engines for Caterpillar Built Machines CID 1599 FMI 06 Engine Fan Pull Solenoid short to ground
3408E and 3412E Engines for Caterpillar Built Machines CID 1599 FMI 05 Engine Fan Pull Solenoid open circuit
322C Excavator Machine System Specifications Track Carrier Roller
305 Mini Hydraulic Excavator Machine Systems Main Hydraulic Pump - Disassemble
307C Excavator Electrical and Electronic System Electrical Components And Connector Locations
307C Excavator Electrical and Electronic System Circuit for Low Idle Switch - Troubleshoot
307C Excavator Electrical and Electronic System Low Idle Indicator Does Not Respond to Low Idle Switch - Troubleshoot
307C Excavator Electrical and Electronic System Controller - Troubleshoot
307C Excavator Electrical and Electronic System Specified Engine Speed for High Idle or Low Idle Is Not Obtained - Troubleshoot
307C Excavator Electrical and Electronic System Engine Speed Does Not Respond to Engine Speed Dial - Troubleshoot
322C Excavator Machine System Specifications Track Roller (Single Flange)
315C Excavator Machine System Specifications Boom - 5100 mm (201 inch)
307C Excavator Electrical and Electronic System Indicators Do Not Illuminate - Troubleshoot
307C Excavator Electrical and Electronic System Low Idle System Does Not Respond to Low Idle Switch - Troubleshoot
VT-30, VT-40, VT-50 and VT-60 Multi Processors Gerotor Motor Leakage - Test
307C Excavator Electrical and Electronic System Engine Speed Dial Does Not Work - Troubleshoot
315C Excavator Machine System Specifications Oil Filter (Return)
M325B Material Handler Machine Systems Undercarriage Frame - Remove
307C Excavator Electrical and Electronic System Monitor - Disassemble
312C Excavator Machine System Specifications Lines (Boom Cylinder)
2001/01/22 The Boom has Changed in order to Extend the Service Life {6501}
2001/01/22 The Boom has Changed in order to Extend the Service Life {6501}