Circuit for Low Idle Switch - Troubleshoot
Problem: The low idle switch circuit is open or shorted to frame ground.
Solution: Check that the following wire terminals and components are connected properly: "CONN 3", "CONN 4", "CONN 6", "CONN 14", "CONN 33", "CONN 34", "CONN 35", "CONN 36", "CONN 39", "CONN 40" and "CONN 48". If the problem still exists, use the following checking procedure diagram to troubleshoot the system.
Show/hide table
 | |
| Illustration 1 | g00760458 |
Caterpillar Information System:
307C Excavator Electrical and Electronic System Low Idle Indicator Does Not Respond to Low Idle Switch - Troubleshoot
307C Excavator Electrical and Electronic System Controller - Troubleshoot
307C Excavator Electrical and Electronic System Specified Engine Speed for High Idle or Low Idle Is Not Obtained - Troubleshoot
307C Excavator Electrical and Electronic System Engine Speed Does Not Respond to Engine Speed Dial - Troubleshoot
315C Excavator Machine System Specifications Hydraulic Tank and Filter
M325B Excavator Machine System Specifications Pilot Valve (Pilot Manifold)
307C Excavator Electrical and Electronic System Hydraulic Oil Temperature Gauge Reads High or Gauge Quickly Moves Beyond Operating Range - Troubleshoot
307C Excavator Electrical and Electronic System Hydraulic Oil Temperature Gauge Reads Low or Gauge Does Not Move - Troubleshoot
307C Excavator Electrical and Electronic System Engine Coolant Temperature Gauge Reads High or Gauge Quickly Moves Beyond Operating Range - Troubleshoot
320C Excavator Machine System Specifications Bucket Cylinder Lines
307C Excavator Electrical and Electronic System Engine Coolant Temperature Gauge Reads Low or Gauge Does Not Move - Troubleshoot
2000/12/18 Recommended Procedure For Lubricating And Tightening The Bolts That Fasten The Counterweights To The Crankshaft {1231}
307C Excavator Electrical and Electronic System Electrical Components And Connector Locations
305 Mini Hydraulic Excavator Machine Systems Main Hydraulic Pump - Disassemble
322C Excavator Machine System Specifications Track Carrier Roller
3408E and 3412E Engines for Caterpillar Built Machines CID 1599 FMI 05 Engine Fan Pull Solenoid open circuit
3408E and 3412E Engines for Caterpillar Built Machines CID 1599 FMI 06 Engine Fan Pull Solenoid short to ground
320B Excavator Machine System Specifications Bucket Cylinder Lines
M325B Material Handler Machine Systems Hydraulic Swivel - Install
2004/06/21 Special Instruction, REHS0872 , "Installation of the 194-1522 Hydraulic Kit " is Available {5057, 6129}
322C Excavator Machine System Specifications Track Roller (Single Flange)
315C Excavator Machine System Specifications Boom - 5100 mm (201 inch)
307C Excavator Electrical and Electronic System Indicators Do Not Illuminate - Troubleshoot
307C Excavator Electrical and Electronic System Low Idle System Does Not Respond to Low Idle Switch - Troubleshoot