Track Carrier Roller
Show/hide table
 | |
| Illustration 1 | g00760588 |
(1) Before assembly, length "M" must be clean and free of paint.
- "M" ... 55 ± 5 mm (2.2 ± 0.2 inch)
(2) During assembly, the O-ring seals and the surfaces of the metal seals that contact the O-ring seals must be clean and dry. Apply a thin coat of oil on the mating surfaces of the metal seals before installation. Make sure that the metal seals are installed squarely in the bore. The O-ring seals must not bulge. Also, the O-ring seals must not be twisted.
(3) End play
- Minimum ... 0.20 mm (0.008 inch)
- Maximum ... 0.75 mm (0.030 inch)
(4) Apply a thin coat of SAE 30 CD oil in the bore.
(5) Add 0.085 ± 0.005 L (0.0225 ± 0.0013 US gal) of SAE 30 CD oil before installing the plug.
Caterpillar Information System:
305 Mini Hydraulic Excavator Machine Systems Main Hydraulic Pump - Disassemble
307C Excavator Electrical and Electronic System Electrical Components And Connector Locations
307C Excavator Electrical and Electronic System Circuit for Low Idle Switch - Troubleshoot
307C Excavator Electrical and Electronic System Low Idle Indicator Does Not Respond to Low Idle Switch - Troubleshoot
307C Excavator Electrical and Electronic System Controller - Troubleshoot
307C Excavator Electrical and Electronic System Specified Engine Speed for High Idle or Low Idle Is Not Obtained - Troubleshoot
307C Excavator Electrical and Electronic System Engine Speed Does Not Respond to Engine Speed Dial - Troubleshoot
315C Excavator Machine System Specifications Hydraulic Tank and Filter
M325B Excavator Machine System Specifications Pilot Valve (Pilot Manifold)
307C Excavator Electrical and Electronic System Hydraulic Oil Temperature Gauge Reads High or Gauge Quickly Moves Beyond Operating Range - Troubleshoot
307C Excavator Electrical and Electronic System Hydraulic Oil Temperature Gauge Reads Low or Gauge Does Not Move - Troubleshoot
307C Excavator Electrical and Electronic System Engine Coolant Temperature Gauge Reads High or Gauge Quickly Moves Beyond Operating Range - Troubleshoot
3408E and 3412E Engines for Caterpillar Built Machines CID 1599 FMI 05 Engine Fan Pull Solenoid open circuit
3408E and 3412E Engines for Caterpillar Built Machines CID 1599 FMI 06 Engine Fan Pull Solenoid short to ground
320B Excavator Machine System Specifications Bucket Cylinder Lines
M325B Material Handler Machine Systems Hydraulic Swivel - Install
2004/06/21 Special Instruction, REHS0872 , "Installation of the 194-1522 Hydraulic Kit " is Available {5057, 6129}
322C Excavator Machine System Specifications Track Roller (Single Flange)
315C Excavator Machine System Specifications Boom - 5100 mm (201 inch)
307C Excavator Electrical and Electronic System Indicators Do Not Illuminate - Troubleshoot
307C Excavator Electrical and Electronic System Low Idle System Does Not Respond to Low Idle Switch - Troubleshoot
VT-30, VT-40, VT-50 and VT-60 Multi Processors Gerotor Motor Leakage - Test
307C Excavator Electrical and Electronic System Engine Speed Dial Does Not Work - Troubleshoot
315C Excavator Machine System Specifications Oil Filter (Return)