115/H115s, 120/H120s/H120Cs, 130/H130s, 140/H140s, 160/H160s, 180/H180s and H195 Hydraulic Hammers Caterpillar


Check Valve - Assemble - 115/H115s, 120/H120s/H120Cs, 130/H130s, 140/H140s, 160/H160s, and 180/H180s

Usage:

115 4PL

Assembly Procedure



    Illustration 1g00682960

    Note: Before you assemble the check valve, coat all of the parts with clean hydraulic oil.

  1. Install two O-rings (4).

  2. Install check valve (2) into valve housing (3).

  3. Install retaining ring (1).

End By:

  1. Install the check valve into the control valve. Refer to the Service Manual, "Check Valve - Install".

Caterpillar Information System:

320B, 320B L, 320B LN, 322B L and 322B LN Excavators Supplement Bucket Linkage - Lubricate
115/H115s, 120/H120s/H120Cs, 130/H130s, 140/H140s, 160/H160s, 180/H180s and H195 Hydraulic Hammers Hydraulic Accumulator - Test and Charge
2000/03/20 New 12 Volt AM/FM Radios Are Available {7338}
A26 Auger Work Tool Systems Auger Planetary - Disassemble
303.5 Mini Hydraulic Excavator Pilot and Travel Speed Manifold
303.5 Mini Hydraulic Excavator Machine Systems Fuel Tank - Remove
2004/09/06 Product Support Literature for Custom Product Machines {0374}
313B ExcavatorEngine Supplement Engine and Main Hydraulic Pump - Install
313B ExcavatorEngine Supplement Engine and Main Hydraulic Pump - Remove
325C and 325C L Excavator Fuel Tank Shutoff and Drain Control
115/H115s, 120/H120s/H120Cs, 130/H130s, 140/H140s, 160/H160s, 180/H180s and H195 Hydraulic Hammers Check Valve - Disassemble - 115/H115s, 120/H120s/H120Cs, 130/H130s, 140/H140s, 160/H160s, and 180/H180s
325D and 329D Excavators Joystick Controls Alternate Patterns
115/H115s, 120/H120s/H120Cs, 130/H130s, 140/H140s, 160/H160s, 180/H180s and H195 Hydraulic Hammers Pressure Control Valve - Remove
115/H115s, 120/H120s/H120Cs, 130/H130s, 140/H140s, 160/H160s, 180/H180s and H195 Hydraulic Hammers Pressure Control Valve - Install
115/H115s, 120/H120s/H120Cs, 130/H130s, 140/H140s, 160/H160s, 180/H180s and H195 Hydraulic Hammers Pressure Control Valve - Disassemble - 115/H115s, 120/H120s/H120Cs, 130/H130s, 140/H140s, and 180/H180s
315C Excavator Engine and Machine Warm-Up
115/H115s, 120/H120s/H120Cs, 130/H130s, 140/H140s, 160/H160s, 180/H180s and H195 Hydraulic Hammers Pressure Control Valve - Assemble - 115/H115s, 120/H120s/H120Cs, 130/H130s, 140/H140s, and 180/H180s
315C Excavator Operation Information
A26 Auger Work Tool Systems Auger Planetary - Assemble
320C Excavator Equipment Lowering with Engine Stopped
303.5 Mini Hydraulic Excavator Speed and Direction Control
349F and 352F Excavators Stopping the Machine
315C Excavator Stopping the Engine
115/H115s, 120/H120s/H120Cs, 130/H130s, 140/H140s, 160/H160s, 180/H180s and H195 Hydraulic Hammers Control Valve - Disassemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.