C-9 Engines for Caterpillar Built Machines Caterpillar


Water Temperature Regulator

Usage:

TK711 101



Illustration 1g00589065

Fully open temperature of the water temperature regulator ... 92 °C (198 °F)

Begin to open temperature of the water temperature regulator. ... 81 ° to 84 °C (178 ° to 183 °F)

(1) Minimum stroke of the water temperature regulator at fully open temperature ... 10.4 mm (0.41 inch)

Caterpillar Information System:

307B Excavator Blade Control
3064 and 3066 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
307B Excavator Engine Speed Control
3126B Engines for Caterpillar Built Machines Camshaft Bearings - Remove and Install
W330B Material Handler Safety Messages
3064 and 3066 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seals - Remove and Install
307B Excavator Heating and Air Conditioning Control - If Equipped
3126B Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
3126B Engines for Caterpillar Built Machines Piston Cooling Jets - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
307B Excavator Cab Door
307B Excavator Window (Front)
W330B Material Handler Leaving the Machine
Flash Procedure For The Software Update Of The EMCP II+ With Generator Set Control+{4490} Flash Procedure For The Software Update Of The EMCP II+ With Generator Set Control+{4490}
5230 Excavator Hydraulic System Power Shift Pressure - Check
5230B Excavator Hydraulic System Caterpillar Underspeed System - Calibrate
3064 and 3066 Engines for Caterpillar Built Machines Fuel Injection Nozzles - Remove
318B and 318B LN Excavator Lifting Capacities - 318C L with VA Boom
5230 Excavator Hydraulic System M1 Port Pressure - Check
W330B Material Handler Material Handler Operation
3114, 3116 and 3126 MUI Engine Governors Prepare Calibration Bench for Test Procedure
3064 and 3066 Engines for Caterpillar Built Machines Fuel Injection Nozzles - Install
W330B Material Handler Engine Stopping
W330B Material Handler Shipping the Machine
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.