Window (Front)
Note: The sun visor (if equipped) must be down before the front window is raised. The front window will not lock in the overhead storage position with the sun visor in the raised position.
To provide full ventilation inside the cab, the upper window can be fully opened.
Show/hide table
When opening or closing the windshields, be extra careful to prevent any personal injury. Also, the hydraulic activation control lever must be in the LOCKED position to prevent any possibility of sudden movement of machine due to inadvertent contact with the hydraulic control(s). |
Do not change the position of the window until the following items have been done:
- Park the machine on a level surface.
- Lower the equipment to the ground.
- Move the hydraulic activation control lever to the LOCKED position.
- Stop the engine.
Show/hide table
Illustration 1 | g00543871 |
The hydraulic activation control lever is shown in the LOCKED position. For further details on this procedure, refer to Operation and Maintenance Manual, "Hydraulic Activation Control".
- Hold both grips (1), and push both latches (2) in order to unlatch the window.
- Lift the window upward until the window is securely latched in the overhead storage position.
Show/hide table
Illustration 3 g00610487 (3) Latch - Rotate latch (3) in order to secure the front window.
- Reverse Step 1 through Step 3 in order to lower the front window.
Show/hide table
Illustration 2 | g00610485 |
(1) Grip
(2) Latch |
Caterpillar Information System:
307B Excavator Drink Holder
3064 and 3066 Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
307B Excavator Ashtray
307B Excavator Lighter
3114, 3116, and 3126 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
307B Excavator Light Switches
307B Excavator Gauges
307B Excavator Plate Locations and Film Locations
3126 Truck Engine Military Pistons and Connecting Rods - Remove
C-9 Engines for Caterpillar Built Machines Gear Group (Front)
A13 Auger Frame Mounting Bracket - Inspect - Skid Steer Loader Only
M318 Excavator Hydraulic System Control Valve (Stick Lowering) - Test and Adjust
307B Excavator Cab Door
3064 and 3066 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
3126B Engines for Caterpillar Built Machines Piston Cooling Jets - Remove and Install
3126B Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
307B Excavator Heating and Air Conditioning Control - If Equipped
3064 and 3066 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seals - Remove and Install
W330B Material Handler Safety Messages
3126B Engines for Caterpillar Built Machines Camshaft Bearings - Remove and Install
307B Excavator Engine Speed Control
3064 and 3066 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
307B Excavator Blade Control
C-9 Engines for Caterpillar Built Machines Water Temperature Regulator