Piston Cooling Jets - Remove and Install
拆卸步骤
开始:
- 拆下发动机油底壳。 请参阅拆解和组装, "发动机油底壳 - 拆卸和安装"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 将螺栓 (2) 和活塞冷却喷嘴 (1) 从每个气缸上拆下。
Show/hide table
 | |
| 图 1 | g00987444 |
安装步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将活塞冷却喷嘴 (1) 放置在缸体中。 安装螺栓 (2) 。 将螺栓上紧到 28 ± 7 N·m (21 ± 5 lb ft) 的扭矩。
Show/hide table
| | |
| 图 2 | g00987444 |
End By: 安装发动机油底壳。 请参阅 拆解和组装, "发动机油底壳 - 拆卸和安装"。
Caterpillar Information System:
3064 and 3066 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
307B Excavator Cab Door
307B Excavator Window (Front)
307B Excavator Drink Holder
3064 and 3066 Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
307B Excavator Ashtray
307B Excavator Lighter
3114, 3116, and 3126 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Install
307B Excavator Light Switches
307B Excavator Gauges
307B Excavator Plate Locations and Film Locations
3126 Truck Engine Military Pistons and Connecting Rods - Remove
3126B Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
307B Excavator Heating and Air Conditioning Control - If Equipped
3064 and 3066 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seals - Remove and Install
W330B Material Handler Safety Messages
3126B Engines for Caterpillar Built Machines Camshaft Bearings - Remove and Install
307B Excavator Engine Speed Control
3064 and 3066 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
307B Excavator Blade Control
C-9 Engines for Caterpillar Built Machines Water Temperature Regulator
W330B Material Handler Leaving the Machine
Flash Procedure For The Software Update Of The EMCP II+ With Generator Set Control+{4490} Flash Procedure For The Software Update Of The EMCP II+ With Generator Set Control+{4490}
5230 Excavator Hydraulic System Power Shift Pressure - Check