 | |
| Illustration 1 | g00610268 |
Typical example | |
(1) Camshaft idler gear
Distance (B) between the front of the bearing face and the front of the gear face ... 0.40 ± 0.25 mm (0.016 ± 0.010 inch)
Diameter of new shaft (A) ... 80.000 ± 0.013 mm (3.1496 ± 0.0005 inch)
(2) Camshaft gear
(3) Tighten the bolts for the camshaft idler gear to the following torque. ... 70 ± 15 N·m (50 ± 11 lb ft)
(4) Align the timing marks on the camshaft idler gear (1) with the holes on the camshaft gear (2) and the crankshaft gear (5).
(5) Crankshaft gear
(6) Oil pump drive gear
(7) Bolt
- Tighten the oil pump idler gear bolt to the following torque. ... 70 ± 15 N·m (50 ± 11 lb ft)
(8) Oil pump idler gear
Distance (C) between the rear of the bearing face and the rear of the gear face ... 0.75 ± 0.25 mm (0.030 ± 0.010 inch)
Diameter of new shaft (D) ... 28.644 ± 0.013 mm (1.1277 ± 0.0005 inch)