Caterpillar Underspeed System - Calibrate
Show/hide table
Tools Needed     | Qty     |
7X-1425 Data Link Cable     | 1     |
7X-1570 Data Link Cable     | 1     |
7X-1700 Communication Adapter     | 1     |
Show/hide table
Illustration 1 | g00465069 |
Electronic Service Tool Connected to the ET Diagnostic Connector in the Cab. |
- Connect the Electronic Service Tool with a 7X-1700 Communication Adapter to the ET diagnostic connector with a 7X-1425 cable and a 7X-1570 cable .
- Calibrate the underspeed system by using the Electronic Technician (ET). Refer to the section P-686 in the Troubleshooting, RENR1305, "3500B Engines for Caterpillar Built Engines" for the procedure to calibrate by using the ET.
Caterpillar Information System:
5230 Excavator Hydraulic System Power Shift Pressure - Check
Flash Procedure For The Software Update Of The EMCP II+ With Generator Set Control+{4490} Flash Procedure For The Software Update Of The EMCP II+ With Generator Set Control+{4490}
W330B Material Handler Leaving the Machine
C-9 Engines for Caterpillar Built Machines Water Temperature Regulator
307B Excavator Blade Control
3064 and 3066 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
307B Excavator Engine Speed Control
3126B Engines for Caterpillar Built Machines Camshaft Bearings - Remove and Install
W330B Material Handler Safety Messages
3064 and 3066 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seals - Remove and Install
307B Excavator Heating and Air Conditioning Control - If Equipped
3126B Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines Fuel Injection Nozzles - Remove
318B and 318B LN Excavator Lifting Capacities - 318C L with VA Boom
5230 Excavator Hydraulic System M1 Port Pressure - Check
W330B Material Handler Material Handler Operation
3114, 3116 and 3126 MUI Engine Governors Prepare Calibration Bench for Test Procedure
3064 and 3066 Engines for Caterpillar Built Machines Fuel Injection Nozzles - Install
W330B Material Handler Engine Stopping
W330B Material Handler Shipping the Machine
C-9 Engines for Caterpillar Built Machines Cylinder Block
W330B Material Handler Cab Tilting
3064 and 3066 Engines for Caterpillar Built Machines Fuel Shutoff Solenoid - Remove and Install
W330B Material Handler Boom Base Pins - Lubricate