Fuel Injection Lines - Remove
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 9U-7067 | Cap | 6 |
| 9U-7069 | Cap | 6 | |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
| |
| Illustration 1 | g00900458 |
- Loosen clamp (1). Disconnect hose (2).
Show/hide table
Illustration 2 g00900459 - Loosen clamps (3) and disconnect hoses (4).
- Remove bolts (5) and breather (6).
Show/hide table
Illustration 3 g00900461 - Remove tube assemblies (7) and (8).
Show/hide table
Illustration 4 g00900462 - Disconnect fuel injection lines (9) at the fuel injectors.
Show/hide table
Illustration 5 g00900464 - Disconnect fuel injection lines (9) at fuel injection pump (10).
- Remove fuel injection lines (9).
Caterpillar Information System:
3064 and 3066 Engines for Caterpillar Built Machines Crankshaft Pulley - Remove and Install
W330B Material Handler Hydraulic System Pump Hydraulic System
365B and 365B Series II Excavators Supplement for 3196 Engine Refrigerant Compressor - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
Pin Grabber Quick Coupler Quick Coupler - Lubricate
5230 Excavator Machine Parking
5230 Excavator Machine Operation
W330B Material Handler Hydraulic System Pilot Hydraulic System
3064 and 3066 Engines for Caterpillar Built Machines Lifter Group - Remove and Install
365B and 365B Series II Excavators Supplement for 3196 Engine Engine Oil Level Gauge (Dipstick) - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines Fuel Injection Pump Housing - Assemble
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pump - Install
302.5 Mini Hydraulic Excavator Hydraulic System Combined Function Hydraulic Operation
302.5 Mini Hydraulic Excavator Hydraulic System Control Valve (Straight Travel)
3064 and 3066 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove
365B and 365B Series II Excavators Supplement for 3196 Engine Refrigerant Accumulator - Remove and Install
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0190 - FMI 02 Loss of Engine Speed signal
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0190 - FMI 03 Engine Speed open/short to +batt
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0190 - FMI 08 Engine Speed signal abnormal
W330B Material Handler Hydraulic System General Information
Commissioning Procedure For The Hydraulic Generator{1404, 5050} Commissioning Procedure For The Hydraulic Generator{1404, 5050}
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Main Hydraulic Pump Air Pressure - Purge
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Solenoid Valve (Two Speed Travel) - Remove and Install
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Solenoid Valve (Proportional Reducing) - Remove and Install