Crankshaft Pulley - Remove and Install
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 1P-2321 | 组合式拉拔器 | 1 |
| B | 6V-9120 | 套筒 (1) | 1 |
Show/hide table
| ( 1 ) | 工具 (B) 为 46 mm 套筒。 |
开始:
- 拆下 V 形皮带。 请参阅拆解和组装, "V 形皮带 - 拆卸和安装"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 利用工具 (B) 将螺母 (1) 和垫圈 (2) 从曲轴的螺纹端拆下。
Show/hide table
 | |
| 图 1 | g00604778 |
- 利用工具 (A) 将曲轴皮带轮 (3) 从发动机上拆下。
Show/hide table
 | |
| 图 2 | g00604784 |
- 必要时，利用手锤和凿子将耐磨衬套 (4) 从曲轴皮带轮 (3) 上拆下。 将凿子与耐磨衬套表面保持适当的角度。 在三个位置轻敲耐磨衬套。 张力释放之后，就可以拆下耐磨衬套了。
Show/hide table
 | |
| 图 3 | g00604792 |
安装步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将曲轴皮带轮 (3) 定位到发动机上。
Show/hide table
| | |
| 图 4 | g00604778 |
- 安装垫圈 (2) 和螺母 (1) 。 使用工具 (B) 将螺母 (1) 拧紧至扭矩 490 ± 10 N·m (361 ± 7 lb ft)。
End By: 安装 V 形皮带。 请参阅 拆解和组装, "V 形皮带 - 拆卸和安装"。
Caterpillar Information System:
W330B Material Handler Hydraulic System Pump Hydraulic System
365B and 365B Series II Excavators Supplement for 3196 Engine Refrigerant Compressor - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
Pin Grabber Quick Coupler Quick Coupler - Lubricate
5230 Excavator Machine Parking
5230 Excavator Machine Operation
W330B Material Handler Hydraulic System Pilot Hydraulic System
3064 and 3066 Engines for Caterpillar Built Machines Lifter Group - Remove and Install
365B and 365B Series II Excavators Supplement for 3196 Engine Engine Oil Level Gauge (Dipstick) - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines Fuel Injection Pump Housing - Assemble
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pump - Install
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Air Inlet Heater
3056 Engine for Caterpillar Built Machines Fuel Injection Lines - Remove
302.5 Mini Hydraulic Excavator Hydraulic System Combined Function Hydraulic Operation
302.5 Mini Hydraulic Excavator Hydraulic System Control Valve (Straight Travel)
3064 and 3066 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove
365B and 365B Series II Excavators Supplement for 3196 Engine Refrigerant Accumulator - Remove and Install
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0190 - FMI 02 Loss of Engine Speed signal
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0190 - FMI 03 Engine Speed open/short to +batt
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0190 - FMI 08 Engine Speed signal abnormal
W330B Material Handler Hydraulic System General Information
Commissioning Procedure For The Hydraulic Generator{1404, 5050} Commissioning Procedure For The Hydraulic Generator{1404, 5050}
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Main Hydraulic Pump Air Pressure - Purge
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Solenoid Valve (Two Speed Travel) - Remove and Install