365B and 365B Series II Excavators Supplement for 3196 Engine Caterpillar


Engine Oil Level Gauge (Dipstick) - Remove and Install

Usage:

365B L 4XZ

Removal Procedure




    Illustration 1g00278210

  1. Unlatch the engine hood and raise the engine hood.



    Illustration 2g00602697

  1. Unscrew the oil level gauge assembly (1) and remove the oil level gauge.

  1. Remove the bolt and washer (3) that connects the guide tube (2) to the oil filler tube.



    Illustration 3g00602698

  1. Remove the bolt and washer (4) and remove the guide tube (2) .

Installation Procedure




    Illustration 4g00602698

  1. Place the guide tube (4) in position and install the bolt and washer (2) .



    Illustration 5g00602697

  1. Install the bolt and washer (3) that connects the guide tube (2) to the oil filler tube.

  1. Screw the oil level gauge assembly (1) into the guide tube (2) .

  1. Close the engine hood and latch the engine hood.

Caterpillar Information System:

3304B and 3306B Engines for Caterpillar Built Machines Fuel Injection Pump Housing - Assemble
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pump - Install
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Air Inlet Heater
365B and 365B Series II Excavators Supplement for 3196 Engine Engine Oil Filler - Remove and Install
LR15 and LR18 Landscape Rakes Mounting Bracket - Inspect
3064 and 3066 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Aftercooler
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Drift Reduction Valve (Stick) - Install
5230B Excavator Fire Extinguisher Location
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068} Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Drift Reduction Valve (Stick) - Remove
365B and 365B Series II Excavators Supplement for 3196 Engine Crankcase Breather - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines Lifter Group - Remove and Install
W330B Material Handler Hydraulic System Pilot Hydraulic System
5230 Excavator Machine Operation
5230 Excavator Machine Parking
Pin Grabber Quick Coupler Quick Coupler - Lubricate
3064 and 3066 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
365B and 365B Series II Excavators Supplement for 3196 Engine Refrigerant Compressor - Remove and Install
W330B Material Handler Hydraulic System Pump Hydraulic System
3064 and 3066 Engines for Caterpillar Built Machines Crankshaft Pulley - Remove and Install
3056 Engine for Caterpillar Built Machines Fuel Injection Lines - Remove
302.5 Mini Hydraulic Excavator Hydraulic System Combined Function Hydraulic Operation
302.5 Mini Hydraulic Excavator Hydraulic System Control Valve (Straight Travel)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.