Drift Reduction Valve (Stick) - Install
Installation Procedure
- Fasten a hoist and a suitable lifting device to valve (10). The weight of the valve is 36 kg (80 lb). Lower the valve into the machine.
Show/hide table
Illustration 1 | g00602000 |
- Install bolts (9) .
Show/hide table
Illustration 2 | g00601988 |
- Install hose (7). Connect electrical connector (8) .
Show/hide table
Illustration 3 | g00601958 |
- Tighten bolts (5) and bolts (6). This will secure tube (4) .
Show/hide table
Illustration 4 | g00601955 |
- Install bolts (3) in order to secure tube (4) .
Show/hide table
Illustration 5 | g00601937 |
- Install walkway (2). Install the washers and five bolts (1) .
Show/hide table
Illustration 6 | g00609831 |
Caterpillar Information System:
5230B Excavator Fire Extinguisher Location
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068} Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Drift Reduction Valve (Stick) - Remove
365B and 365B Series II Excavators Supplement for 3196 Engine Crankcase Breather - Remove and Install
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Relief Valve (One-Way Hydraulic Flow)
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Fuel Conservation Practices
3064 and 3066 Engines for Caterpillar Built Machines Cylinder Head - Remove
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Fuel Shutoff Solenoid
3064 and 3066 Engines for Caterpillar Built Machines Cylinder Head - Install
3064 and 3066 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Pilot Control Valve (Auxiliary)
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Aftercooler
3064 and 3066 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
LR15 and LR18 Landscape Rakes Mounting Bracket - Inspect
365B and 365B Series II Excavators Supplement for 3196 Engine Engine Oil Filler - Remove and Install
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Air Inlet Heater
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pump - Install
3304B and 3306B Engines for Caterpillar Built Machines Fuel Injection Pump Housing - Assemble
365B and 365B Series II Excavators Supplement for 3196 Engine Engine Oil Level Gauge (Dipstick) - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines Lifter Group - Remove and Install
W330B Material Handler Hydraulic System Pilot Hydraulic System
5230 Excavator Machine Operation
5230 Excavator Machine Parking