365B and 365B Series II Excavators Supplement for 3196 Engine Caterpillar


Refrigerant Accumulator - Remove and Install

Usage:

365B 9PZ

Removal Procedure

    ------ WARNING! ------

    Personal injury can result from contact with refrigerant.

    Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.

    Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.

    Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.

    Personal injury or death can result from inhaling refrigerant through a lit cigarette.

    Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.

    Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.

    Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.

    ----------------------


    NOTICE

    Effective July 1, 1992 regulations prohibit the venting of any refrigerant into the atmosphere. Refer to Caterpillar publications Service Manuals, SENR3334, SENR5664, and NEDG5065 for the proper procedure, the proper equipment, and the proper tools needed in order to reclaim refrigerant from any Caterpillar equipment.


  1. Reclaim the refrigerant in the air conditioning system.



    Illustration 1g00101721

  1. Open the access door on the front left side of the machine.



    Illustration 2g00603346

  1. Disconnect tube assembly (2) from the refrigerant accumulator (1) .



    Illustration 3g00603348

  1. Disconnect tube assembly (3) from refrigerant accumulator (1). Remove the bolt and washer (5) and remove the bracket (4). Remove the refrigerant accumulator (1) from the machine.

Installation Procedure




    Illustration 4g00603348

  1. Place the refrigerant accumulator (1) in position. Install the bracket (4) and install the bolt and washer (5). Connect tube assembly (3) to the refrigerant accumulator (1) .



    Illustration 5g00603346

  1. Connect tube assembly (2) to the refrigerant accumulator (1) .

  1. Charge the air conditioning system.

Caterpillar Information System:

3064 and 3066 Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove
302.5 Mini Hydraulic Excavator Hydraulic System Control Valve (Straight Travel)
302.5 Mini Hydraulic Excavator Hydraulic System Combined Function Hydraulic Operation
3056 Engine for Caterpillar Built Machines Fuel Injection Lines - Remove
3064 and 3066 Engines for Caterpillar Built Machines Crankshaft Pulley - Remove and Install
W330B Material Handler Hydraulic System Pump Hydraulic System
365B and 365B Series II Excavators Supplement for 3196 Engine Refrigerant Compressor - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
Pin Grabber Quick Coupler Quick Coupler - Lubricate
5230 Excavator Machine Parking
5230 Excavator Machine Operation
W330B Material Handler Hydraulic System Pilot Hydraulic System
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0190 - FMI 02 Loss of Engine Speed signal
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0190 - FMI 03 Engine Speed open/short to +batt
3500B and 3500B High Displacement Generator Set Engines MID 036 - CID 0190 - FMI 08 Engine Speed signal abnormal
W330B Material Handler Hydraulic System General Information
Commissioning Procedure For The Hydraulic Generator{1404, 5050} Commissioning Procedure For The Hydraulic Generator{1404, 5050}
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Main Hydraulic Pump Air Pressure - Purge
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Solenoid Valve (Two Speed Travel) - Remove and Install
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Solenoid Valve (Proportional Reducing) - Remove and Install
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Relief Valve (Pilot) - Remove and Install
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Ether Starting Aid
3064 and 3066 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines Fuel Injection Pump Housing - Disassemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.