Refrigerant Expansion Valve - Remove and Install
Untuk mengganti katup ekspansi, gunakan prosedur berikut. Rujuk ke Buku Petunjuk Servis, "Memecahkan Masalah Sistem Kontrol AC dan Pemanasan" sebelum melakukan pekerjaan servis untuk sistem AC.
- Pulihkan refrigerant.
Catatan: Tutup semua saluran dan selang yang diputus.
- Lepaskan isolasi dan klip. Isolasi dan klip akan menahan labu sensor ke pipa keluar evaporator.
- Putuskan saluran sensor untuk tekanan dari pipa keluar evaporator.
- Longgarkan dan lepaskan dua koneksi di katup ekspansi. Lepaskan katup ekspansi.
Catatan: Periksa seal o-ring. Seal harus dalam kondisi baik dan seal harus dilumasi dengan benar menggunakan oli refrigerant yang sesuai sebelum perakitan.
- Pasang katup ekspansi untuk penggantian dan kencangkan kedua koneksi.
- Kencangkan koneksi sensor tekanan pada pipa keluar evaporator.
- Gunakan 8P-6355 Klip untuk menahan labu sensor pada pipa keluar evaporator. Labu sensor harus sedekat mungkin dengan koil. Labu sensor harus merupakan hulu koneksi sensor tekanan pada pipa keluar evaporator. 5P-7070 Isolasi harus dikebat dengan kencang di sekeliling klip, labu sensor, dan pipa keluar. Tidak boleh ada isolasi antara labu sensor dan pipa keluar.
- Kencangkan semua koneksi dengan benar.
- Evakuasikan sistem. Rujuk ke Pengujian dan Penyetelan, "Sistem Refrigerant - Pengosongan".
- Isi sistem dengan refrigerant dalam jumlah yang benar berdasarkan berat. Rujuk ke Pengujian dan Penyetelan, "Sistem Refrigerant - Pengisian".
Caterpillar Information System:
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Safety Messages
M312 Excavator Machine System Boom Cylinder
M312 Excavator Machine System Stick - 3.0 m (9.84 ft)
M312 Excavator Machine System Stick - 2.6 m (8.53 ft)
315B Excavator Machine Systems Final Drive and Travel Motor - Install
315B Excavator Machine Systems Final Drive and Travel Motor - Remove
315B Excavator Machine Systems Main Control Valve - Disassemble
322B Excavator Hydraulic System Piston Pump (Main) - Test
315B Excavator Machine Systems Main Control Valve - Install
315B Excavator Machine Systems Final Drive and Travel Motor - Assemble
M312 Excavator Machine System Stick - 2.3 m (7.55 ft)
322B Excavator Hydraulic System Pump Control (Negative Flow) - Test
315B Excavator Machine Systems Main Control Valve - Assemble
312B, 320B, 322B, 325B, 330B and 345B Excavators Air Conditioning and Heating Systems with R-134a Refrigerant Control Panel (Air Conditioner and Heater)
M312 Excavator Machine System Boom Cylinder
312B Excavator Attachments One-Way Hydraulic Flow Operation
M312 Excavator Machine System Boom Cylinder
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Compressor - Remove and Install
M312 Excavator Machine System Stick Cylinder
312B, 320B, 322B, 325B, 330B and 345B Excavators Air Conditioning and Heating Systems with R-134a Refrigerant Control Module - Main Control Module - Heater/Air Conditioner Unit
M312 and M315 Excavators Boom, Stick and Bucket Operation
312B, 320B, 322B, 325B, 330B and 345B Excavators Air Conditioning and Heating Systems with R-134a Refrigerant Speed Control - Resistor and Relays for Controlling Fan Speed
311B and 312B Excavators Hydraulic System Operational Checks - 311B
M312 Excavator Machine System Bucket Cylinder