M312 Excavator Machine System Caterpillar

Stick Cylinder

Usage:

M312 6TL

Show/hide table




Illustration 1	g03398777

Show/hide table

Table 1
Specification for 118-4978 Stick Cylinder Gp
Item	Qty	Part	Specification Description
1	1	105-6343 Bushing	Bore before assembly is 60.125 ± 0.035 mm (2.3671 ± 0.0014 inch).
1	1	105-6343 Bushing	Installation depth is 7.5 ± 0.5 mm (0.30 ± 0.02 inch).
A	1	118-4997 Cylinder As	Bore is 100.000 to 100.054 mm (3.9370 to 3.9391 inch).
B	1	136-6025 Rod As	Diameter is 69.93 ± 0.03 mm (2.753 ± 0.001 inch).
C	1	114-9323 Head	Bore over two lands is 70.53 ± 0.03 mm (2.777 ± 0.001 inch).
2	1	117-9435 Bushing	Bore before assembly is 60.18 ± 0.02 mm (2.369 ± 0.001 inch).
3	1	160-0036 Spring	Length under test force is 18 mm (0.7 inch).
			Test force is 22.6 ± 2.5 N (5.1 ± 0.6 lb).
			Free length after test is 20 mm (0.8 inch).
4	1	143-8149 Special Locknut	Before assembly, apply 309-6932 Hydraulic Oil to the face and threads.
4	1	143-8149 Special Locknut	Torque to 2900 ± 90 N·m (2139 ± 66 lb ft).
5	1	119-5456 Ring	Lubricate the inside diameter and the outside diameter with clean grease.
6	1	9X-7298 Seal As	Lubricate the inside diameter and the outside diameter with clean grease.
7	1	143-8025 Ring	Lubricate the inside diameter and the outside diameter with clean grease.
8	1	6I-6922 Seal Ring	Lubricate the inside diameter and the outside diameter with clean grease.
9	1	114-0753 Bushing	Outside diameter before assembly is 75.120 ± 0.025 mm (2.9575 ± 0.0010 inch).
9	1	114-0753 Bushing	Thickness is 2.475 ± 0.025 mm (0.0974 ± 0.0010 inch).
10		170-9841 Buffer Seal	Lubricate the sealing lip lightly with the lubricant that is being sealed.
11	1	170-9857 U-Cup Seal	Lubricate the sealing lip lightly with the lubricant that is being sealed.
12	1	165-9283 Lip Type Seal	Lubricate the sealing lip lightly with the lubricant that is being sealed.
13	-	-	Before assembly, apply green Loctite 609 to the wiper seal groove before assembly.