315B L Excavator Caterpillar


Engine Oil Level - Check

Usage:

315B L 5SW


NOTICE

Do not overfill the crankcase. Engine damage can result.


Park the machine on level ground. The oil level should only be checked after the engine has been stopped for at least 15 minutes.

Check the oil level while the engine is stopped. Do not check the oil level while the engine is running.




    Illustration 1g00359072

  1. Unlatch the engine hood and raise the engine hood.



    Illustration 2g00403994

  1. Remove dipstick (1) and wipe off the oil.

  1. Reinsert dipstick (1) .

  1. Remove the dipstick again and check the oil level on the dipstick.

  1. Maintain the oil level to the "MAX OIL" mark on the dipstick.

    Note: Refer to Operation and Maintenance Manual, "General Hazard Information" for information on Containing Fluid Spillage.

  1. Remove oil filler plug (2) in order to add oil, if necessary. See Operation and Maintenance Manual, "Refill Capacities", and Operation and Maintenance Manual, "Lubricant Viscosities" for more information.

    Note: If the oil is deteriorated or badly contaminated, change the oil regardless of the maintenance interval.

  1. Clean the oil filler plug.

  1. Install the oil filler plug.

  1. Close the engine hood and latch the engine hood.

Caterpillar Information System:

M312 Excavator Machine System Boom - One Piece
312B, 320B, 322B, 325B, 330B and 345B Excavators Air Conditioning and Heating Systems with R-134a Refrigerant Air Conditioning and Heating System Schematic
M312 Excavator Machine System Bucket Cylinder
311B and 312B Excavators Hydraulic System Operational Checks - 311B
312B, 320B, 322B, 325B, 330B and 345B Excavators Air Conditioning and Heating Systems with R-134a Refrigerant Speed Control - Resistor and Relays for Controlling Fan Speed
M312 and M315 Excavators Boom, Stick and Bucket Operation
312B, 320B, 322B, 325B, 330B and 345B Excavators Air Conditioning and Heating Systems with R-134a Refrigerant Control Module - Main Control Module - Heater/Air Conditioner Unit
M312 Excavator Machine System Stick Cylinder
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Compressor - Remove and Install
M312 Excavator Machine System Boom Cylinder
312B Excavator Attachments One-Way Hydraulic Flow Operation
M312 Excavator Machine System Boom Cylinder
311B and 312B Excavators Hydraulic System Operational Checks - 312B and 312B L
315B L Excavator Engine Oil and Filter - Change
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Fire Extinguisher Location
315B L Excavator Fuel System Priming Pump - Operate
312B Excavator Attachments General Information
315B L Excavator Fuel System Priming Pump Strainer - Clean
315B L Excavator Fuel System Secondary Filter - Replace
315B L Excavator Cooling System Coolant Additive (DEAC) - Add
315B L Excavator Cooling System Coolant Extender (ELC) - Add
311B and 312B Excavators Hydraulic System Pressure Specifications - 311B
315B L Excavator Cooling System Hoses - Inspect
315B and 315B L Excavator Hydraulic System Relief Valve (One Way Flow Line) - Test and Adjust
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.